Search Linux Wireless

Issue with frame injection on monitor interface (ath9k)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi everyone.

When using frame injection over monitor interface, with handmade packet with Radiotap header + QoS + Data, at sender I capture the packet with tcpdump and it is equal to the one I sent. Although, at receiver station, the packet is diferent, FCS was recalculated or forced to active and calculated, MCS is not the one I supplied, sequence number (QoS field) is not the same, amongst other things. Also, QoS Ack policy was "No Ack" at sender (QoS Control = 0x0020), a Ack frame was transmitted to sender and the received packet arrived with QoS Control = 0x0000.

Tested with Microtik R52n-M (AR9220) on following operating systems:
- AP-STA using Ubuntu Ubuntu 14.04.1 LTS;
- AdHoc using OpenWRT r43000, with kmod-ath9k version 3.10.49+2014-11-04-1 and kmod-mac80211 version 3.10.49+2014-11-04-1.

Regarding to OpenWRT, this malfunction was reported here: https://dev.openwrt.org/ticket/18913

Thanks.




----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux