From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
This patch makes sure that the antenna configuration
is used properly when setting AR_MCI_TX_CTRL.
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_mci.c | 8 ++++++--
drivers/net/wireless/ath/ath9k/ar9003_mci.h | 4 ++++
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
index 1a48528..aca9015 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -973,8 +973,12 @@ int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
(SM(0xe801, AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR) |
SM(0x0000, AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM)));
- REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
- AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+ if (MCI_ANT_ARCH_PA_LNA_SHARED(mci))
+ REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+ else
+ REG_SET_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
ar9003_mci_observation_set_up(ah);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
index 6f305ab..174ebea 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mci.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -118,6 +118,10 @@ enum mci_gpm_coex_bt_update_flags_op {
#define ATH_MCI_ANT_ARCH_2_ANT_PA_LNA_SHARED 0x03
#define ATH_MCI_ANT_ARCH_3_ANT 0x04
+#define MCI_ANT_ARCH_PA_LNA_SHARED(mci) \
+ ((MS(mci->config, ATH_MCI_CONFIG_ANT_ARCH) == ATH_MCI_ANT_ARCH_1_ANT_PA_LNA_SHARED) || \
+ (MS(mci->config, ATH_MCI_CONFIG_ANT_ARCH) == ATH_MCI_ANT_ARCH_2_ANT_PA_LNA_SHARED))
+
enum mci_message_header { /* length of payload */
MCI_LNA_CTRL = 0x10, /* len = 0 */
MCI_CONT_NACK = 0x20, /* len = 0 */
--
2.3.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
