It doesn't operate on PCI core, but PCI host device, so there is no
point of passing core related struct.
Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
drivers/bcma/driver_pci.c | 6 +++---
drivers/net/wireless/b43/main.c | 2 +-
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +-
include/linux/bcma/bcma_driver_pci.h | 2 +-
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index cf92bfa..cfd35bc 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -282,21 +282,21 @@ void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
}
EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
-int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
+int bcma_core_pci_irq_ctl(struct bcma_bus *bus, struct bcma_device *core,
bool enable)
{
struct pci_dev *pdev;
u32 coremask, tmp;
int err = 0;
- if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ if (bus->hosttype != BCMA_HOSTTYPE_PCI) {
/* This bcma device is not on a PCI host-bus. So the IRQs are
* not routed through the PCI core.
* So we must not enable routing through the PCI core. */
goto out;
}
- pdev = pc->core->bus->host_pci;
+ pdev = bus->host_pci;
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index e129b4c..44794d2 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4866,7 +4866,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
- bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
+ bcma_core_pci_irq_ctl(dev->dev->bdev->bus,
dev->dev->bdev, true);
bcma_host_pci_up(dev->dev->bdev->bus);
break;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index bcbfc6e..c84af1d 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -4959,7 +4959,7 @@ static int brcms_b_up_prep(struct brcms_hardware *wlc_hw)
* Configure pci/pcmcia here instead of in brcms_c_attach()
* to allow mfg hotswap: down, hotswap (chip power cycle), up.
*/
- bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core,
+ bcma_core_pci_irq_ctl(wlc_hw->d11core->bus, wlc_hw->d11core,
true);
/*
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
index 23af893..6b8bca6 100644
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -240,7 +240,7 @@ struct bcma_drv_pci {
extern void bcma_core_pci_early_init(struct bcma_drv_pci *pc);
extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
-extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
+extern int bcma_core_pci_irq_ctl(struct bcma_bus *bus,
struct bcma_device *core, bool enable);
extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
