Search Linux Wireless

[SOLVED] Re: compat-wireless iwl4965 on hp/compaq 2510p

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Here's what I did:
(-Compiled my own 2.6.24-4 instead of using debian kernel.)
-Booted XPee and hoped that all the clicking enabled the WLAN device. It seem to be a software button, like a touch panel. -Entered BIOS, disabled switching wlan button to hopefully keep the state constant(ON).

And finally I did configure my WEP, and requested IP and now I'm online ;)

thx guys! /Bachman

Bachman Kharazmi wrote:
Not that easy.
When the module is loaded I press the (touch) panel where the wireless icon is. This still doesn't turn on the WLAN LED.
Nothing in dmesg then I press the touchbutton.

lapp:/tmp# cat /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
2

echo "1" > /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
iwl4965: Error sending REPLY_CARD_STATE_CMD: enqueue_hcmd failed: -5

echo "0" > /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC

lapp:/tmp# cat /sys/bus/pci/drivers/iwl4965/0000\:10\:00.0/rf_kill
2

/Bachman
Tomas Winkler wrote:
On Sat, Apr 5, 2008 at 3:01 PM, Bachman Kharazmi
<bachman@xxxxxxxxxxxxxxxx> wrote:
lapp:/tmp# ip link set wlan0 up
 SIOCSIFFLAGS: No such device

 lapp:/tmp# iwconfig
 lo        no wireless extensions.

 eth1      no wireless extensions.

 wmaster0  no wireless extensions.

 wlan0     IEEE 802.11  ESSID:"planet_mars"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
          Tx-Power=0 dBm
          Retry min limit:7   RTS thr:off   Fragment thr=2352 B
          Encryption key:B200-A927-32DA-86E9-0DEF-EFF3-FB
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


 note that dmesg sais
 iwl4965: Detected Intel Wireless WiFi Link 4965AGN
 iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
 phy1: Selected rate control algorithm 'iwl-4965-rs'
 ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
 iwl4965: Radio disabled by HW RF Kill switch

___iwl4965: Radio disabled by HW RF Kill switch___  this would explain
the problem

can you please enable the RF?
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux