On 5 February 2015 at 20:50, Dave Taht <dave.taht@xxxxxxxxx> wrote: [...] > And I really, really, really wish, that just once during this thread, > someone had bothered to try running a test > at a real world MCS rate - say MCS1, or MCS4, and measured the latency > under load of that... Time between frame submission to firmware and tx-completion on one of my ath10k machines: Legacy 54mbps: ~18ms Legacy 6mbps: ~37ms 11n MCS 3 (nss=0): ~13ms 11n MCS 8 (nss=1): ~6-8ms 11ac NSS=1 MCS=2: ~4-6ms 11ac NSS=2 MCS=0: ~5-8ms Keep in mind this is a clean room environment so retransmissions are kept at minimum. Obviously with a noisy environment you'll get retries at different rates and higher latency. Michał -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
