Search Linux Wireless

Re: [PATCH] ath9k_htc: add adaptive usb flow control to repair soft lockup with monitor mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



yuweizheng@xxxxxxx writes:

> From: Yuwei Zheng <yuweizheng@xxxxxxx>
>
> In the environment with heavy wifi traffic, set the ar9271 into monitor mode, will
> trigger a deadloop panic.
>  
> The ath9k_hif_usb_rx_cb function excute on  the interrupt context, and ath9k_rx_tasklet excute
> on the soft irq context. In other words, the ath9k_hif_usb_rx_cb have more chance to excute than
> ath9k_rx_tasklet.  So in the worst condition,  the rx.rxbuf receive list is always full,
> and the do {}while(true) loop will not be break. The kernel get a soft lockup panic. 

The word wrapping is still wrong, please limit the width to 72 chars or
so. But no need to wrap log snippets, they can exceed the limit.

> Signed-off-by: Yuwei Zheng <zhengyuwei@xxxxxx>
> Signed-off-by: Yuwei Zheng <yuweizheng@xxxxxxx>

Why two of these? Please use just one Signed-off-by line. Unless these
are two different persons with the same name :)

-- 
Kalle Valo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux