New qca6174 with wmi-tlv firmware supports multi-channel operation. To make use of it ath10k needs a few changes: implement mac80211's chanctx API and rework tx queue control a bit. There are still rough edges (involving seldom beacon reports from firmware causing beacon loss in some cases, etc). Hopefully this will be fixed either in driver or firmware eventually. Changes since RFC: * I've sent `ath10k: defer AP self-peer removal wait` separately now because it's not really required for multi-channel per se v2: * fix null deref after rebasing * fix commit log typo Michal Kazior (7): ath10k: allow empty ssid vdev config ath10k: implement chanctx API ath10k: implement adaptive qcs command ath10k: protect ar->arvifs linking with data_lock ath10k: rework tx queue locking ath10k: implement tx pause wmi event ath10k: enable multi-channel on supported devices drivers/net/wireless/ath/ath10k/core.c | 1 + drivers/net/wireless/ath/ath10k/core.h | 16 + drivers/net/wireless/ath/ath10k/htt_rx.c | 87 +++- drivers/net/wireless/ath/ath10k/htt_tx.c | 11 +- drivers/net/wireless/ath/ath10k/mac.c | 682 ++++++++++++++++++++++++++---- drivers/net/wireless/ath/ath10k/mac.h | 57 +++ drivers/net/wireless/ath/ath10k/wmi-ops.h | 16 + drivers/net/wireless/ath/ath10k/wmi-tlv.c | 118 +++++- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 46 ++ drivers/net/wireless/ath/ath10k/wmi.c | 18 +- drivers/net/wireless/ath/ath10k/wmi.h | 1 + 11 files changed, 966 insertions(+), 87 deletions(-) -- 1.8.5.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
