Hi,
On Friday, January 30, 2015 03:45 AM, Arend van Spriel wrote:
If you can send a log with
brcmfmac loaded with parameter 'debug=0x1416' that may give me some more
clues.
Here it is:
[ 2360.049440] brcmfmac: brcmf_sdiod_sgtable_alloc nents=35
[ 2360.049464] brcmfmac: brcmf_sdio_probe Enter
[ 2360.054792] brcmfmac: F1 signature read @0x18000000=0x16864324
[ 2360.056741] brcmfmac: brcmf_bus_change_state 0 -> 2
[ 2360.062095] brcmfmac: brcmf_chip_recognition found AXI chip: BCM4324,
rev=6
[ 2360.174030] brcmfmac: brcmf_chip_cores_check [1 ] core 0x800:42 base
0x18000000 wrap 0x18100000
[ 2360.174054] brcmfmac: brcmf_chip_cores_check [2 ] core 0x812:36 base
0x18001000 wrap 0x18101000
[ 2360.174060] brcmfmac: brcmf_chip_cores_check [3 ] core 0x829:18 base
0x18002000 wrap 0x18102000
[ 2360.174065] brcmfmac: brcmf_chip_cores_check [4 ] core 0x82a:7 base
0x18003000 wrap 0x18103000
[ 2360.174070] brcmfmac: brcmf_chip_cores_check [5 ] core 0x80e:20 base
0x18004000 wrap 0x18104000
[ 2360.174075] brcmfmac: brcmf_chip_cores_check [6 ] core 0x81a:16 base
0x18005000 wrap 0x18105000
[ 2360.174080] brcmfmac: brcmf_chip_cores_check [7 ] core 0x135:0 base
0x1810a000 wrap 0x18107000
[ 2360.179471] brcmfmac: brcmf_chip_setup ccrev=42, pmurev=17,
pmucaps=0x298c5f11
[ 2360.185890] brcmfmac: brcmf_sdio_kso_init Enter
[ 2360.186677] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive
strength init done for chip 4324 rev 6 pmurev 17
[ 2360.194797] brcmfmac: brcmf_attach Enter
[ 2360.194839] brcmfmac: brcmf_proto_attach Enter
[ 2360.198000] brcmfmac: brcmf_sdio_probe completed!!
[ 2360.198010] brcmfmac: brcmf_fw_get_firmwares enter: dev=mmc1:0001:1
[ 2360.198132] usbcore: registered new interface driver brcmfmac
[ 2360.198544] brcmfmac: brcmf_fw_request_code_done enter: dev=mmc1:0001:1
[ 2360.198617] brcmfmac: brcmf_fw_request_nvram_done enter: dev=mmc1:0001:1
[ 2360.198680] brcmfmac: brcmf_sdio_firmware_callback Enter: dev=mmc1:0001:1
[ 2360.199953] brcmfmac: brcmf_chip_enter_download Enter
[ 2360.216692] brcmfmac: brcmf_sdio_download_code_file Enter
[ 2362.872129] brcmfmac: brcmf_sdio_verifymemory Compare RAM dl & ul at
0x00000000; size=403855
[ 2366.982029] brcmfmac: brcmf_sdio_download_nvram Enter
[ 2367.003592] brcmfmac: brcmf_sdio_verifymemory Compare RAM dl & ul at
0x0008f85c; size=1956
[ 2367.025285] brcmfmac: brcmf_chip_exit_download Enter
[ 2367.043627] brcmfmac: brcmf_bus_change_state 2 -> 3
[ 2368.055540] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000):
clkctl 0x50
[ 2368.055552] brcmfmac: brcmf_sdio_firmware_callback failed:
dev=mmc1:0001:1, err=0
[ 2368.055571] brcmfmac: brcmf_sdio_remove Enter
[ 2368.058820] brcmfmac: brcmf_detach Enter
[ 2368.058830] brcmfmac: brcmf_bus_change_state 3 -> 2
[ 2368.058834] brcmfmac: brcmf_bus_detach Enter
[ 2368.058838] brcmfmac: brcmf_sdio_bus_stop Enter
[ 2369.066333] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000):
clkctl 0x50
[ 2369.076908] brcmfmac: brcmf_proto_detach Enter
[ 2370.091185] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000):
clkctl 0x50
[ 2370.112802] brcmfmac: brcmf_chip_enter_download Enter
[ 2370.141772] brcmfmac: brcmf_sdio_remove Disconnected
Thanks,
Sebastien
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
