There are some very rare cases with some hardware
configuration that the device doesn't init quickly
enough in which case reading chip_id yielded 0.
This caused driver to subsequently fail to setup
the device.
Signed-off-by: Michal Kazior <michal.kazior@xxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/pci.c | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 3b40a86..6a512fb 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2544,18 +2544,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
goto err_release;
}
- chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
- if (chip_id == 0xffffffff) {
- ath10k_err(ar, "failed to get chip id\n");
- goto err_sleep;
- }
-
- if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
- ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
- pdev->device, chip_id);
- goto err_sleep;
- }
-
ret = ath10k_pci_alloc_pipes(ar);
if (ret) {
ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
@@ -2582,6 +2570,24 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
goto err_deinit_irq;
}
+ ret = ath10k_pci_chip_reset(ar);
+ if (ret) {
+ ath10k_err(ar, "failed to reset chip: %d\n", ret);
+ goto err_free_irq;
+ }
+
+ chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+ if (chip_id == 0xffffffff) {
+ ath10k_err(ar, "failed to get chip id\n");
+ goto err_free_irq;
+ }
+
+ if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
+ ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+ pdev->device, chip_id);
+ goto err_sleep;
+ }
+
ath10k_pci_sleep(ar);
ret = ath10k_core_register(ar, chip_id);
--
1.8.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
