Search Linux Wireless

[PATCH 1/8] ath10k: scan should handle scan-start-failed event properly.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ben Greear <greearb@xxxxxxxxxxxxxxx>

In case firmware fails to start the scan, then complete
the start condition and clean up so that driver does not
block on timeout.

Signed-off-by: Ben Greear <greearb@xxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath10k/mac.c | 11 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c | 20 ++++++++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 249107d..924879f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2375,6 +2375,17 @@ static int ath10k_start_scan(struct ath10k *ar,
 		return -ETIMEDOUT;
 	}
 
+	/* If we failed to start the scan, return error code at
+	 * this point.  This is probably due to some issue in the
+	 * firmware, but no need to wedge the driver due to that...
+	 */
+	spin_lock_bh(&ar->data_lock);
+	if (ar->scan.state == ATH10K_SCAN_IDLE) {
+		spin_unlock_bh(&ar->data_lock);
+		return -EINVAL;
+	}
+	spin_unlock_bh(&ar->data_lock);
+
 	/* Add a 200ms margin to account for event/command processing */
 	ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout,
 				     msecs_to_jiffies(arg->max_scan_time+200));
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 6e4ece0..203bcb9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -916,6 +916,25 @@ static void ath10k_wmi_event_scan_started(struct ath10k *ar)
 	}
 }
 
+static void ath10k_wmi_event_scan_start_failed(struct ath10k *ar)
+{
+	lockdep_assert_held(&ar->data_lock);
+
+	switch (ar->scan.state) {
+	case ATH10K_SCAN_IDLE:
+	case ATH10K_SCAN_RUNNING:
+	case ATH10K_SCAN_ABORTING:
+		ath10k_warn(ar, "received scan start failed event in an invalid scan state: %s (%d)\n",
+			    ath10k_scan_state_str(ar->scan.state),
+			    ar->scan.state);
+		break;
+	case ATH10K_SCAN_STARTING:
+		complete(&ar->scan.started);
+		__ath10k_scan_finish(ar);
+		break;
+	}
+}
+
 static void ath10k_wmi_event_scan_completed(struct ath10k *ar)
 {
 	lockdep_assert_held(&ar->data_lock);
@@ -1057,6 +1076,7 @@ static int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	case WMI_SCAN_EVENT_START_FAILED:
 		ath10k_warn(ar, "received scan start failure event\n");
+		ath10k_wmi_event_scan_start_failed(ar);
 		break;
 	case WMI_SCAN_EVENT_DEQUEUED:
 	case WMI_SCAN_EVENT_PREEMPTED:
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux