On 18 December 2014 at 14:00, Antonio Quartulli <antonio@xxxxxxxxxxxxx> wrote: > Hello, Hi, Sorry for the late reply. > (line grabbed from dmesg at boot time) > > On my device I have configured 2 AP vifs and for each of them I would > like to read the last TX rate of the associated stations. > > As I've read on wireless.kernel.org this is not possible through the > standard nl/cfg80211 interface and therefore I have been trying to read > /sys/kernel/debug/ieee80211/phy1/ath10k/fw_stats , but this file always > reports "ath10k PEER stats (0)" (no peers..). > > I tried printing some debug messages here and there and the only useful > information I got is that in "ath10k_wmi_10x_pull_fw_stats()" the value > of "ev->num_peer_stats" is always 0. > > Is this yet another fw limitation? Firmware stats has a very fragile ABI. Apparently 10.2 changed it again and thus is broken. I'll try to look into it more if time permits. > I also realized that upon station connection ath10k receives the > WMI_10_2_PEER_RATECODE_LIST_EVENTID event but it is not handled as no > handler is implemented. Might it be related with my problem ? No. That's not the problem. Michał -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
