Hi, Janusz I have applied the three patches and tested with firmware 999.999.0.636 but not working. Any advice what's wrong? --- ChunYeow Some of my dmesg: [ 640.450000] ath10k_pci 0000:00:00.0: wmi pdev set param 3 value 34 [ 640.450000] ath10k_pci 0000:00:00.0: wmi pdev set param 4 value 34 [ 640.450000] ath10k_pci 0000:00:00.0: wmi pdev set wmm params [ 640.450000] ath10k_pci 0000:00:00.0: wmi pdev set wmm params [ 640.450000] ath10k_pci 0000:00:00.0: wmi pdev set wmm params [ 640.450000] ath10k_pci 0000:00:00.0: wmi pdev set wmm params [ 640.450000] ath10k_pci 0000:00:00.0: wmi peer create vdev_id 0 peer_addr 04:f0:21:0c:a5:1c [ 640.450000] ath10k_pci 0000:00:00.0: wmi vdev id 0x0 set param 16 value 0 [ 640.450000] ath10k_pci 0000:00:00.0: wmi vdev id 0x0 set param 3 value 100 [ 640.450000] ath10k_pci 0000:00:00.0: mac vdev 0 beacon_interval 100 [ 640.450000] ath10k_pci 0000:00:00.0: vdev 0 set beacon tx mode to staggered [ 640.450000] ath10k_pci 0000:00:00.0: wmi pdev set param 7 value 0 [ 640.450000] ath10k_pci 0000:00:00.0: mac vdev 0 start center_freq 5180 phymode 11na-ht20 [ 640.450000] ath10k_pci 0000:00:00.0: wmi vdev start id 0x0 flags: 0x0, freq 5180, mode 4, ch_flags: 0x4000000, max_power: 34 [ 640.460000] ath10k_pci 0000:00:00.0: WMI_VDEV_START_RESP_EVENTID [ 640.460000] ath10k_pci 0000:00:00.0: wmi mgmt vdev up id 0x0 assoc id 0 bssid 52:8d:75:e5:00:52 [ 640.460000] ath10k_pci 0000:00:00.0: mac vdev 0 up [ 640.460000] ath10k_pci 0000:00:00.0: mac vdev 0 cts_prot 0 [ 640.460000] ath10k_pci 0000:00:00.0: wmi vdev id 0x0 set param 44 value 0 [ 640.460000] ath10k_pci 0000:00:00.0: WMI_TBTTOFFSET_UPDATE_EVENTID [ 640.460000] ath10k_pci 0000:00:00.0: mac vdev 0 slot_time 2 [ 640.460000] ath10k_pci 0000:00:00.0: wmi vdev id 0x0 set param 7 value 2 [ 640.460000] ath10k_pci 0000:00:00.0: mac vdev 0 preamble 1n [ 640.460000] ath10k_pci 0000:00:00.0: wmi vdev id 0x0 set param 8 value 1 [ 640.460000] ath10k_pci 0000:00:00.0: mac vdev 0 peer create 04:f0:21:0c:a5:43 (new sta) sta 1 / 16 peer 2 / 24 [ 640.460000] ath10k_pci 0000:00:00.0: wmi peer create vdev_id 0 peer_addr 04:f0:21:0c:a5:43 [ 640.460000] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready [ 640.470000] ath10k_pci 0000:00:00.0: mac sta 04:f0:21:0c:a5:43 associated [ 640.470000] ath10k_pci 0000:00:00.0: mac peer 04:f0:21:0c:a5:43 qos 0 [ 640.470000] ath10k_pci 0000:00:00.0: mac peer 04:f0:21:0c:a5:43 phymode 11a [ 640.470000] ath10k_pci 0000:00:00.0: wmi peer assoc vdev 0 addr 04:f0:21:0c:a5:43 (new) [ 640.470000] ath10k_pci 0000:00:00.0: wmi vdev 0 peer 0x04:f0:21:0c:a5:43 set param 5 value 1 [ 640.470000] ath10k_pci 0000:00:00.0: wmi vdev id 0x0 set param 44 value 33 [ 640.470000] ath10k_pci 0000:00:00.0: mac monitor recalc started? 0 should? 0 [ 640.540000] ath10k_pci 0000:00:00.0: mac sta rc update for 04:f0:21:0c:a5:43 changed 00000004 bw 0 nss 1 smps 2 [ 640.540000] ath10k_pci 0000:00:00.0: mac sta rc update for 04:f0:21:0c:a5:43 changed 00000008 bw 0 nss 3 smps 2 [ 640.540000] ath10k_pci 0000:00:00.0: mac update sta 04:f0:21:0c:a5:43 nss 3 [ 640.540000] ath10k_pci 0000:00:00.0: wmi vdev 0 peer 0x04:f0:21:0c:a5:43 set param 5 value 3 [ 640.540000] ath10k_pci 0000:00:00.0: mac update sta 04:f0:21:0c:a5:43 supp rates/nss [ 640.540000] ath10k_pci 0000:00:00.0: mac ht peer 04:f0:21:0c:a5:43 mcs cnt 24 nss 3 [ 640.540000] ath10k_pci 0000:00:00.0: mac peer 04:f0:21:0c:a5:43 qos 0 [ 640.540000] ath10k_pci 0000:00:00.0: mac peer 04:f0:21:0c:a5:43 phymode 11na-ht20 [ 640.540000] ath10k_pci 0000:00:00.0: wmi peer assoc vdev 0 addr 04:f0:21:0c:a5:43 (reassociate) [ 640.540000] ath10k_pci 0000:00:00.0: wmi vdev 0 peer 0x04:f0:21:0c:a5:43 set param 5 value 3 [ 640.560000] ath10k_pci 0000:00:00.0: wmi event debug mesg len 460 [ 641.400000] ath10k_pci 0000:00:00.0: rx skb 86be4b40 len 148 peer 04:f0:21:0c:a5:43 mcast sn 2 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 642.170000] ath10k_pci 0000:00:00.0: mac monitor recalc started? 0 should? 0 [ 642.400000] ath10k_pci 0000:00:00.0: rx skb 86b49b40 len 108 peer 04:f0:21:0c:a5:43 mcast sn 3 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 651.560000] ath10k_pci 0000:00:00.0: wmi event debug mesg len 28 [ 1740.540000] ath10k_pci 0000:00:00.0: rx skb 86af8540 len 60 peer 04:f0:21:0c:a5:43 mcast sn 4 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1740.540000] ath10k_pci 0000:00:00.0: rx skb 86967600 len 116 peer 04:f0:21:0c:a5:43 ucast sn 0 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1741.550000] ath10k_pci 0000:00:00.0: rx skb 86967000 len 116 peer 04:f0:21:0c:a5:43 ucast sn 1 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1742.550000] ath10k_pci 0000:00:00.0: rx skb 86b8acc0 len 116 peer 04:f0:21:0c:a5:43 ucast sn 2 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1743.550000] ath10k_pci 0000:00:00.0: rx skb 86a7a600 len 116 peer 04:f0:21:0c:a5:43 ucast sn 3 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1746.560000] ath10k_pci 0000:00:00.0: rx skb 86a79cc0 len 60 peer 04:f0:21:0c:a5:43 ucast sn 4 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1752.410000] ath10k_pci 0000:00:00.0: rx skb 86a9d540 len 116 peer 04:f0:21:0c:a5:43 ucast sn 5 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1753.410000] ath10k_pci 0000:00:00.0: rx skb 86a7c6c0 len 116 peer 04:f0:21:0c:a5:43 ucast sn 6 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1754.410000] ath10k_pci 0000:00:00.0: rx skb 86a7f6c0 len 116 peer 04:f0:21:0c:a5:43 ucast sn 7 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1755.420000] ath10k_pci 0000:00:00.0: rx skb 86afc240 len 116 peer 04:f0:21:0c:a5:43 ucast sn 8 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1756.420000] ath10k_pci 0000:00:00.0: rx skb 86a7d480 len 116 peer 04:f0:21:0c:a5:43 ucast sn 9 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 [ 1757.420000] ath10k_pci 0000:00:00.0: rx skb 86af0180 len 116 peer 04:f0:21:0c:a5:43 ucast sn 10 rate_idx 0 vht_nss 0 freq 5180 band 1 flag 0x200000 fcs-err 0 mic-err 0 amsdu-more 0 On Tue, Dec 16, 2014 at 4:52 PM, Janusz Dziedzic <janusz.dziedzic@xxxxxxxxx> wrote: > This fix TX problem when IBSS used in HT mode. > Before we used 6Mbps all the time for TX direction. > > Reported-by: Yeoh Chun-Yeow <yeohchunyeow@xxxxxxxxx> > Signed-off-by: Janusz Dziedzic <janusz.dziedzic@xxxxxxxxx> > --- > drivers/net/wireless/ath/ath10k/mac.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c > index 5475f0f..c9e7995 100644 > --- a/drivers/net/wireless/ath/ath10k/mac.c > +++ b/drivers/net/wireless/ath/ath10k/mac.c > @@ -1411,9 +1411,16 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar, > if (vif->bss_conf.qos) > arg->peer_flags |= WMI_PEER_QOS; > break; > + case WMI_VDEV_TYPE_IBSS: > + if (sta->wme) > + arg->peer_flags |= WMI_PEER_QOS; > + break; > default: > break; > } > + > + ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n", > + sta->addr, !!(arg->peer_flags & WMI_PEER_QOS)); > } > > static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, > -- > 1.9.1 > > > _______________________________________________ > ath10k mailing list > ath10k@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/ath10k -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html