On Wed, Dec 10, 2014 at 12:23:14AM +0100, Marcel Holtmann wrote: > Hi Johannes, > > > On Dec 9, 2014, at 23:21, Vadim Kochan <vadim4j@xxxxxxxxx> wrote: > > > > It allows to identify the wlan kind of device for the user application, > > e.g.: > > > > # ip -d link > > > > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default > > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0 > > 2: enp0s25: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 > > link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff promiscuity 0 > > 3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 > > link/ether XX:XX:XX:XX:XX:XX brd ff:ff:ff:ff:ff:ff promiscuity 0 > > wlan > > have we considered also exposing the mode of this netdev. So for example sta,ap,p2p-go,p2p-client etc. If we can send dynamic updates via RTNL, we could easily tell the networking management system what type of wireless device we have here. I am thinking about it like "wlan/p2p-go" etc. Or should this be better kept strictly to "wlan". > > And I am not sure RTNL would be capable of changing this kind strings at runtime anyway. > > Regards > > Marcel > May be better do not mix 2 things in one attribute? Regards, Vadim -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html