Search Linux Wireless

Re: [PATCH v4 1/2] dt: bindings: add ath10k wireless device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday 27 November 2014 14:08:56 Kalle Valo wrote:
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> new file mode 100644
> index 000000000000..edefc26c6204
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
> @@ -0,0 +1,30 @@
> +* Qualcomm Atheros ath10k wireless devices
> +
> +For ath10k devices the calibration data can be provided through Device
> +Tree. The node is a child node of the PCI controller.
> +
> +Required properties:
> +-compatible : Should be "qcom,ath10k"
> +
> +Optional properties:
> +- qcom,ath10k-calibration-data : calibration data as an array, the
> +                                length can vary between hw versions
> +

Does the device always have a valid mac address in hardware? If not,
how about listing that as well using the mac-address property?

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux