From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
Adds new VID/PID for the Marvell 88W8766. The kernel currently only supports
the device as PCI, but it is also available using USB. An example of a device
delivered with the 88W8766 as USB is the Globalscale Mirabox.
TX buffer size is set to driver default (2K), as we do not know the firmware
requirement.
Signed-off-by: Kristian Evensen <kristian.evensen@xxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
drivers/net/wireless/mwifiex/Kconfig | 2 +-
drivers/net/wireless/mwifiex/usb.c | 13 +++++++++++++
drivers/net/wireless/mwifiex/usb.h | 3 +++
3 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig
index e70d0df..aa01c9b 100644
--- a/drivers/net/wireless/mwifiex/Kconfig
+++ b/drivers/net/wireless/mwifiex/Kconfig
@@ -31,7 +31,7 @@ config MWIFIEX_PCIE
mwifiex_pcie.
config MWIFIEX_USB
- tristate "Marvell WiFi-Ex Driver for USB8797/8897"
+ tristate "Marvell WiFi-Ex Driver for USB8766/8797/8897"
depends on MWIFIEX && USB
select FW_LOADER
---help---
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index 4371e12..710dbd9 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -27,6 +27,11 @@ static struct mwifiex_if_ops usb_ops;
static struct semaphore add_remove_card_sem;
static struct usb_device_id mwifiex_usb_table[] = {
+ /* 8766 */
+ {USB_DEVICE(USB8XXX_VID, USB8766_PID_1)},
+ {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8766_PID_2,
+ USB_CLASS_VENDOR_SPEC,
+ USB_SUBCLASS_VENDOR_SPEC, 0xff)},
/* 8797 */
{USB_DEVICE(USB8XXX_VID, USB8797_PID_1)},
{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8797_PID_2,
@@ -348,10 +353,12 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
/* PID_1 is used for firmware downloading only */
switch (id_product) {
+ case USB8766_PID_1:
case USB8797_PID_1:
case USB8897_PID_1:
card->usb_boot_state = USB8XXX_FW_DNLD;
break;
+ case USB8766_PID_2:
case USB8797_PID_2:
case USB8897_PID_2:
card->usb_boot_state = USB8XXX_FW_READY;
@@ -780,6 +787,11 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K;
strcpy(adapter->fw_name, USB8897_DEFAULT_FW_NAME);
break;
+ case USB8766_PID_1:
+ case USB8766_PID_2:
+ adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
+ strcpy(adapter->fw_name, USB8766_DEFAULT_FW_NAME);
+ break;
case USB8797_PID_1:
case USB8797_PID_2:
default:
@@ -1048,5 +1060,6 @@ MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("Marvell WiFi-Ex USB Driver version" USB_VERSION);
MODULE_VERSION(USB_VERSION);
MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE(USB8766_DEFAULT_FW_NAME);
MODULE_FIRMWARE(USB8797_DEFAULT_FW_NAME);
MODULE_FIRMWARE(USB8897_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/mwifiex/usb.h b/drivers/net/wireless/mwifiex/usb.h
index 4c41c2a..a7cbba1 100644
--- a/drivers/net/wireless/mwifiex/usb.h
+++ b/drivers/net/wireless/mwifiex/usb.h
@@ -24,6 +24,8 @@
#define USB8XXX_VID 0x1286
+#define USB8766_PID_1 0x2041
+#define USB8766_PID_2 0x2042
#define USB8797_PID_1 0x2043
#define USB8797_PID_2 0x2044
#define USB8897_PID_1 0x2045
@@ -37,6 +39,7 @@
#define MWIFIEX_RX_DATA_URB 6
#define MWIFIEX_USB_TIMEOUT 100
+#define USB8766_DEFAULT_FW_NAME "mrvl/usb8766_uapsta.bin"
#define USB8797_DEFAULT_FW_NAME "mrvl/usb8797_uapsta.bin"
#define USB8897_DEFAULT_FW_NAME "mrvl/usb8897_uapsta.bin"
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
