From: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
On some x86 platforms, the LED gpio is active high
instead of active low. Identify such cards and modify
the GPIO usage to make sure LED works properly.
Cc: Russell Hu <rhu@xxxxxxxxxxxxxxxx>
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ath9k.h | 1 +
drivers/net/wireless/ath/ath9k/gpio.c | 9 +++++++--
drivers/net/wireless/ath/ath9k/hw.h | 1 +
drivers/net/wireless/ath/ath9k/init.c | 3 +++
drivers/net/wireless/ath/ath9k/main.c | 6 ++++--
drivers/net/wireless/ath/ath9k/pci.c | 4 +++-
6 files changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 85d74ff..9e7ba9b 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -931,6 +931,7 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs);
#define ATH9K_PCI_AR9565_2ANT 0x0100
#define ATH9K_PCI_NO_PLL_PWRSAVE 0x0200
#define ATH9K_PCI_KILLER 0x0400
+#define ATH9K_PCI_LED_ACT_HI 0x0800
/*
* Default cache line size, in bytes.
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index b1956bf..2fef7a4 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -25,7 +25,12 @@ static void ath_led_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct ath_softc *sc = container_of(led_cdev, struct ath_softc, led_cdev);
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, (brightness == LED_OFF));
+ u32 val = (brightness == LED_OFF);
+
+ if (sc->sc_ah->config.led_active_high)
+ val = !val;
+
+ ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, val);
}
void ath_deinit_leds(struct ath_softc *sc)
@@ -82,7 +87,7 @@ void ath_fill_led_pin(struct ath_softc *sc)
ath9k_hw_cfg_output(ah, ah->led_pin, AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
/* LED off, active low */
- ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+ ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 0 : 1);
}
#endif
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index e49721e8..10ab060 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -329,6 +329,7 @@ struct ath9k_ops_config {
bool alt_mingainidx;
bool no_pll_pwrsave;
bool tx_gain_buffalo;
+ bool led_active_high;
};
enum ath9k_int {
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index a4d69a0..ccf29b7 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -422,6 +422,9 @@ static void ath9k_init_pcoem_platform(struct ath_softc *sc)
ah->config.no_pll_pwrsave = true;
ath_info(common, "Disable PLL PowerSave\n");
}
+
+ if (sc->driver_data & ATH9K_PCI_LED_ACT_HI)
+ ah->config.led_active_high = true;
}
static void ath9k_eeprom_request_cb(const struct firmware *eeprom_blob,
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index a91ee92..081e1ca 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -726,7 +726,8 @@ static int ath9k_start(struct ieee80211_hw *hw)
if (ah->led_pin >= 0) {
ath9k_hw_cfg_output(ah, ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(ah, ah->led_pin, 0);
+ ath9k_hw_set_gpio(ah, ah->led_pin,
+ (ah->config.led_active_high) ? 1 : 0);
}
/*
@@ -868,7 +869,8 @@ static void ath9k_stop(struct ieee80211_hw *hw)
spin_lock_bh(&sc->sc_pcu_lock);
if (ah->led_pin >= 0) {
- ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+ ath9k_hw_set_gpio(ah, ah->led_pin,
+ (ah->config.led_active_high) ? 0 : 1);
ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
}
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index e3f60d5..f009b5b 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -657,7 +657,9 @@ static const struct pci_device_id ath_pci_id_table[] = {
0x0036,
PCI_VENDOR_ID_DELL,
0x020E),
- .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV },
+ .driver_data = ATH9K_PCI_AR9565_2ANT |
+ ATH9K_PCI_BT_ANT_DIV |
+ ATH9K_PCI_LED_ACT_HI},
/* PCI-E AR9565 (WB335) */
{ PCI_VDEVICE(ATHEROS, 0x0036),
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
