From: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxxxx>
For AR9340, the correct values for SLP32 registers are present
in the initvals, so overriding them is not needed.
Signed-off-by: Miaoqing Pan <miaoqing@xxxxxxxxxxxxxxxx>
Signed-off-by: Sujith Manoharan <c_manoha@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 2df6d2e..5c9c9a7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -668,12 +668,16 @@ static void ar9003_hw_override_ini(struct ath_hw *ah)
if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
if (ah->is_clk_25mhz) {
REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
- REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
- REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
+ if (!AR_SREV_9340(ah)) {
+ REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
+ REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
+ }
} else {
REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
- REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
- REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
+ if (!AR_SREV_9340(ah)) {
+ REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
+ REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
+ }
}
udelay(100);
}
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
