This information element is mandatory in case TDLS channel-switching is to
be supported. The channels given are ones supported and allowed to be
active in the current regulatory setting.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@xxxxxxxxx>
Reviewed-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Arik Nemtsov <arik@xxxxxxxxxx>
---
net/mac80211/tdls.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c
index d4fe091..8fb314b 100644
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -48,6 +48,75 @@ static void ieee80211_tdls_add_ext_capab(struct sk_buff *skb)
*pos++ = WLAN_EXT_CAPA5_TDLS_ENABLED;
}
+static u8
+ieee80211_tdls_add_subband(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb, u16 start, u16 end,
+ u16 spacing)
+{
+ u8 subband_cnt = 0, ch_cnt = 0;
+ struct ieee80211_channel *ch;
+ struct cfg80211_chan_def chandef;
+ int i, subband_start;
+
+ for (i = start; i <= end; i += spacing) {
+ if (!ch_cnt)
+ subband_start = i;
+
+ ch = ieee80211_get_channel(sdata->local->hw.wiphy, i);
+ if (ch) {
+ /* we will be active on the channel */
+ u32 flags = IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_NO_IR;
+ cfg80211_chandef_create(&chandef, ch,
+ NL80211_CHAN_HT20);
+ if (cfg80211_chandef_usable(sdata->local->hw.wiphy,
+ &chandef, flags)) {
+ ch_cnt++;
+ continue;
+ }
+ }
+
+ if (ch_cnt) {
+ u8 *pos = skb_put(skb, 2);
+ *pos++ = ieee80211_frequency_to_channel(subband_start);
+ *pos++ = ch_cnt;
+
+ subband_cnt++;
+ ch_cnt = 0;
+ }
+ }
+
+ return subband_cnt;
+}
+
+static void
+ieee80211_tdls_add_supp_channels(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
+{
+ /*
+ * Add possible channels for TDLS. These are channels that are allowed
+ * to be active.
+ */
+ u8 subband_cnt;
+ u8 *pos = skb_put(skb, 2);
+
+ *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
+
+ /*
+ * 5GHz and 2GHz channels numbers can overlap. Ignore this for now, as
+ * this doesn't happen in real world scenarios.
+ */
+
+ /* 2GHz, with 5MHz spacing */
+ subband_cnt = ieee80211_tdls_add_subband(sdata, skb, 2412, 2472, 5);
+
+ /* 5GHz, with 20MHz spacing */
+ subband_cnt += ieee80211_tdls_add_subband(sdata, skb, 5000, 5825, 20);
+
+ /* length */
+ *pos = 2 * subband_cnt;
+}
+
static u16 ieee80211_get_tdls_sta_capab(struct ieee80211_sub_if_data *sdata,
u16 status_code)
{
@@ -190,6 +259,7 @@ ieee80211_tdls_add_setup_start_ies(struct ieee80211_sub_if_data *sdata,
ieee80211_add_srates_ie(sdata, skb, false, band);
ieee80211_add_ext_srates_ie(sdata, skb, false, band);
+ ieee80211_tdls_add_supp_channels(sdata, skb);
/* add any custom IEs that go before Extended Capabilities */
if (extra_ies_len) {
@@ -526,6 +596,7 @@ ieee80211_tdls_prep_mgmt_packet(struct wiphy *wiphy, struct net_device *dev,
26 + /* max(WMM-info, WMM-param) */
2 + max(sizeof(struct ieee80211_ht_cap),
sizeof(struct ieee80211_ht_operation)) +
+ 50 + /* supported channels */
extra_ies_len +
sizeof(struct ieee80211_tdls_lnkie));
if (!skb)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
