On 11/08/14 21:39, Felipe Contreras wrote:
Hi,
I just got an ECS LIVA and I haven't been able to get the wireless
working. First I got the error that the brcmfmac43241b4-sdio.txt file
was missing. I got the file from the ECS's beta drivers [1], but it's
still not working.
brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init
done for chip 4324 rev 5 pmurev 17
brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Jul 17 2013
07:36:07 version 6.10.197.71 (r412987) FWID 01-882d2634
brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
brcmfmac: brcmf_add_if: ignore IF event
WPA association/authentication failed for interface 'wlan0'
I also tried a nvram file that is stored in EFI variables, but it
didn't work either.
Some things seem to work some times, but not the whole association.
This is a 3.17.2 kernel.
Any ideas?
Hi Felipe,
The ideas may come to us with a bit more trace information. The logging
above is the usual stuff so no problem indication there.
I looked at the nvram file from [1]. At the end there are some entries
about OOB wakeup, ie. starting with 'sd_'. You may remove those, but
giving the logging it would not be the first thing to do.
Could you share the nvram obtained from EFI? Also please create a kernel
log with debug=0xd416.
Regards,
Arend
[1] http://www.ecs.com.tw/LIVA/support.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
