On 11/06/2014 04:52 PM, Murilo Opsfelder Araujo wrote:
On 11/06/2014 09:40 AM, Murilo Opsfelder Araujo wrote:
On 11/05/2014 04:12 PM, Larry Finger wrote:
On 11/05/2014 03:16 AM, Mike Galbraith wrote:
On Wed, 2014-10-29 at 23:30 -0500, Larry Finger wrote:
On 10/29/2014 06:28 PM, Murilo Opsfelder Araujo wrote:
This is a complement of commit 08054200117a95afc14c3d2ed3a38bf4e345bf78
"rtlwifi: Add check for get_btc_status callback".
With this patch, next-20141029 at least does not panic with rtl8192se
device.
This patch is OK, but as noted it is not complete.
I have patches to fix all the kernel panics for rtl8192se AND
rtl8192ce. There
are missing parts, but I would prefer submitting mine, which would
conflict with
this one. For that reason, NACK for this one, and please apply the
set I am
submitting now.
It's all in there now, but my RTL8191SEvB is still dead. Squabbling
with it isn't going all that well either.
As soon as 38506ece rtlwifi: rtl_pci: Start modification for new drivers
is applied, explosions appear. Subsequently applying...
08054200 rtlwifi: Add check for get_btc_status callback
c0386f15 rtlwifi: rtl8192ce: rtl8192de: rtl8192se: Fix handling for
missing get_btc_status
50147969 rtlwifi: rtl8192se: Fix duplicate calls to
ieee80211_register_hw()
30c5ccc6 rtlwifi: rtl8192se: Add missing section to read descriptor
setting
75a916e1 rtlwifi: rtl8192se: Fix firmware loading
...fixes that mess up, but leaves the interface dead in the same manner
as if nothing has been reverted. So it _seems_ the bustage lurks in
38506ece somewhere. Too bad it's non-dinky, and written in wifi-ese :)
Yes, I am aware that rtl8192se is failing, and now that I am back from
vacation, I am working on the problem. If you want to use the driver
with kernel 3.18, clone the repo at
http://github.com/lwfinger/rtlwifi_new.git and build and install either
the master or kernel_version branches. Both work.
I am in the process of trying to find what the crucial difference is
between that repo and the kernel version.
Larry
I'm sending to everyone so others can jump in as well.
Here are the steps I've followed.
Installed and booted my kernel:
$ sudo dpkg -i linux-image-3.18.0-rc3-next-20141105-panda_3.18.0-rc3-next-20141105-panda-1_amd64.deb linux-headers-3.18.0-rc3-next-20141105-panda_3.18.0-rc3-next-20141105-panda-1_amd64.deb
Built modules from Larry's github repository.
$ cd rtlwifi_new
$ make
$ sudo make install
$ sudo modprobe -rv rtl8192se
rmmod rtl8192se
rmmod rtl_pci
rmmod rtlwifi
rmmod mac80211
rmmod cfg80211
The module does not load:
$ sudo modprobe -v rtl8192se
insmod /lib/modules/3.18.0-rc3-next-20141105-panda/kernel/net/wireless/cfg80211.ko
insmod /lib/modules/3.18.0-rc3-next-20141105-panda/kernel/net/mac80211/mac80211.ko
insmod /lib/modules/3.18.0-rc3-next-20141105-panda/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
insmod /lib/modules/3.18.0-rc3-next-20141105-panda/kernel/drivers/net/wireless/rtlwifi/rtl_pci.ko
insmod /lib/modules/3.18.0-rc3-next-20141105-panda/extra/rtl8192se.ko
ERROR: could not insert 'rtl8192se': Invalid argument
And /var/log/messages showed:
Nov 5 22:28:01 laptop kernel: [ 301.276806] rtl8192se: disagrees about version of symbol rtl_process_phyinfo
Nov 5 22:28:01 laptop kernel: [ 301.276812] rtl8192se: Unknown symbol rtl_process_phyinfo (err -22)
Nov 5 22:28:01 laptop kernel: [ 301.276864] rtl8192se: disagrees about version of symbol rtl_get_tcb_desc
Nov 5 22:28:01 laptop kernel: [ 301.276866] rtl8192se: Unknown symbol rtl_get_tcb_desc (err -22)
Here is what I did in order to get the rtl8192se from Larry's repo to
work:
$ cd rtlwifi_new
$ make
$ sudo modprobe -rv rtl8192se
rmmod rtl8192se
rmmod rtl_pci
rmmod rtlwifi
rmmod mac80211
rmmod cfg80211
$ sudo modprobe -v cfg80211
insmod /lib/modules/3.18.0-rc3-next-20141106-panda/kernel/net/wireless/cfg80211.ko
$ sudo modprobe -v mac80211
insmod /lib/modules/3.18.0-rc3-next-20141106-panda/kernel/net/mac80211/mac80211.ko
$ sudo insmod ./rtlwifi.ko
$ sudo insmod ./rtl_pci.ko
$ sudo insmod ./rtl8192se/rtl8192se.ko
Cascardo helped me to investigate this and the issue was that modprobe
was loading the core rtl drivers from the next-20141105 and the
rtl8192se from Larry's repo. Thus, rtl8192se didn't have all its
required symbols at loading time.
Loading the drivers in reverse order using insmod did the trick.
Larry, your rtl8192se from rtlwifi_new repository is working pretty
fine on my hardware. I'm looking forward to see that code landing
linux 3.18.
I am happy that it is working now; however, if you had done "sudo make install",
the new drivers would have been in the proper directories, and you would not
have gotten the incorrect symbol errors, or need to use the insmod commands that
you post.
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html