From: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
When the ARC is reset when we exit from Sx in case we had
WoWLAN running, we can't access the prph before we reset
the NIC.
Reviewed-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/pcie/trans.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 5c9064f..aea0fe9 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1023,14 +1023,6 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans,
return 0;
}
- iwl_pcie_set_pwr(trans, false);
-
- val = iwl_read32(trans, CSR_RESET);
- if (val & CSR_RESET_REG_FLAG_NEVO_RESET) {
- *status = IWL_D3_STATUS_RESET;
- return 0;
- }
-
/*
* Also enables interrupts - none will happen as the device doesn't
* know we're waking it up, only when the opmode actually tells it
@@ -1050,6 +1042,8 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans,
return ret;
}
+ iwl_pcie_set_pwr(trans, false);
+
iwl_trans_pcie_tx_reset(trans);
ret = iwl_pcie_rx_init(trans);
@@ -1058,7 +1052,12 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans,
return ret;
}
- *status = IWL_D3_STATUS_ALIVE;
+ val = iwl_read32(trans, CSR_RESET);
+ if (val & CSR_RESET_REG_FLAG_NEVO_RESET)
+ *status = IWL_D3_STATUS_RESET;
+ else
+ *status = IWL_D3_STATUS_ALIVE;
+
return 0;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
