This makes the initial NF calibration less likely to fail.
Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9002_calib.c | 2 ++
drivers/net/wireless/ath/ath9k/hw.c | 6 ++++--
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 07994e3..42190b6 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -856,6 +856,8 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
/* Do PA Calibration */
ar9002_hw_pa_cal(ah, true);
+ ath9k_hw_loadnf(ah, chan);
+ ath9k_hw_start_nfcal(ah, true);
if (ah->caldata)
set_bit(NFCAL_PENDING, &ah->caldata->cal_flags);
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8be4b14..85a7817 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1953,8 +1953,10 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
if (ath9k_hw_mci_is_enabled(ah))
ar9003_mci_check_bt(ah);
- ath9k_hw_loadnf(ah, chan);
- ath9k_hw_start_nfcal(ah, true);
+ if (AR_SREV_9300_20_OR_LATER(ah)) {
+ ath9k_hw_loadnf(ah, chan);
+ ath9k_hw_start_nfcal(ah, true);
+ }
if (AR_SREV_9300_20_OR_LATER(ah))
ar9003_hw_bb_watchdog_config(ah);
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
