On Sun, Oct 19, 2014 at 6:51 PM, Eliad Peller <eliad@xxxxxxxxxx> wrote: > hi, > > On Sun, Oct 19, 2014 at 2:50 PM, Krishna Chaitanya > <chaitanya.mgit@xxxxxxxxx> wrote: >> We are testing SMPS functionality for AP mode. The driver conveys its >> capabilities through setting the HT capability which can be set to 0-3. >> >> I wanted to convey support for both Dynamic and Static Powersave >> and then control the config through hostapd.conf file. Currently this is >> not possible.From driver i can only advertize support for static (or) dynamic >> not both (HW_SUPPORTS_* is a different thing which is used in >> doing checks at debugfs level). >> >> So if i wanted to configure different modes from hostapd.conf, i >> have to change the driver settings as well. >> >> Shouldn't it be the other way around, based on driver's _HW_ flags >> we should convey the capabilities to user-space (currently we use >> ht_cap for this) and it will configure the mode from the configuration >> file. I think the design of SMPS configuration should be changed. >> > this was recently changed. take a look at this patchset: > http://www.spinics.net/lists/linux-wireless/msg126749.html > > we also have a matching supplicant patchset that will probably be > upstreamed soon. Thanks Ellad, it looks good to me, will try out them once they are up stream. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html