Search Linux Wireless

Re: ath10k firmware crash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13 October 2014 14:06, voncken <cedric.voncken@xxxxxxxxx> wrote:
>> >
>> > Have you a benchmark reference with ATH10K ? at this time we can send
>> around 700 Mbit/s, is it the maximum or we can expected better ?
>>
>> If this is OTA then this is pretty good. If this is cabled RF w/ attentuator
>> it should be possible to get ~900mbps of UDP traffic with multiple streams on
>> iperf. At least that's what I was getting on 10.1 firmware (on both AP and
>> STA) last time I checked.
>>
>> Getting more than 700mbps OTA requires AP and STA antenna alignment voodoo.
>>
> I did some tests with a linksys WRT1900AC and I have ~950 mbps OTA easily.

You mean ath10k (STA) VS WRT1900AC get up ~950mbps?
If so, could you say what's the HW, FW version you use?

-- 
Bartosz
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux