Search Linux Wireless

Re: compile Failed in openwrt for [PATCH] “add support for ack timeout estimation in ath9k driver ”

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have patch the file successful. I have not test it. The further question is:
The wifi card in my two boards are communicated with ad hoc mode,does the patches are useful for that?


from jammy's iPhone

在 2014年9月22日,20:59,Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx> 写道:

>> Hi, all,
> 
> Hi,
> 
>> I have read the http://www.spinics.net/lists/linux-wireless/msg124980.html for patching the ath9k driver in compat-wireless-2014-05-22 in openwrt trunk, but when I patch, for example, “the [PATCH 01/10] ath9k: export methods related to ack timeout estimation”, it failed.
> 
> please use latest dynack patchset:
> http://www.spinics.net/lists/linux-wireless/msg127038.html
> 
>> the command window showed that:
>> patching file drivers/net/wireless/ath/ath9k/hw.h
>> Hunk #1 FAILED at 1080.
>> 1 out of 1 hunk FAILED -- saving rejects to file drivers/net/wireless/ath/ath9k/hw.h.rej.
>> 
>> i have checked the hw.h file, but I can not see anything wrong, how should i do further?
> 
> You should port dynack on compat-wireless-2014-05-22. E.g:
> 
> --- a/drivers/net/wireless/ath/ath9k/hw.h
> +++ b/drivers/net/wireless/ath/ath9k/hw.h
> @@ -1080,6 +1080,10 @@ void ar9002_hw_load_ani_reg(struct ath_hw *ah,
> struct ath9k_channel *chan);
> void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
> void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
> 
> +void ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us);
> +void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us);
> +void ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
> +
> #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
> static inline bool ath9k_hw_btcoex_is_enabled(struct ath_hw *ah)
> {
> 
> this chunk will fail since OpenWRT uses CPTCFG_ATH9K_BTCOEX_SUPPORT
> insted of CONFIG_ATH9K_BTCOEX_SUPPORT
> 
>> another question is,if I patch them manualy,I can not see the dnyack choice in the menuconfig,what should I do then?
> 
> You should add dynack to OpenWRT mac80211 package Makefile
> 
>> I am waiting for your suggestions.
>> 
>> from jammy's iPhone--
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> Regards,
> Lorenzo
> 
> -- 
> UNIX is Sexy: who | grep -i blonde | talk; cd ~; wine; talk; touch;
> unzip; touch; strip; gasp; finger; gasp; mount; fsck; more; yes; gasp;
> umount; make clean; sleep
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux