From: Ben Greear <greearb@xxxxxxxxxxxxxxx>
When re-associating a station, the nss was set back to
maximum value even if user had configured small number
of tx chains. So, pay attention to user's config in
this case as well.
Signed-off-by: Ben Greear <greearb@xxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/mac.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 855c71c..c5d31cc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4086,6 +4086,10 @@ ath10k_default_bitrate_mask(struct ath10k *ar,
u32 legacy = 0x00ff;
u8 ht = 0xff, i;
u16 vht = 0x3ff;
+ u16 nrf = ar->num_rf_chains;
+
+ if (ar->cfg_tx_chainmask)
+ nrf = get_nss_from_chainmask(ar->cfg_tx_chainmask);
switch (band) {
case IEEE80211_BAND_2GHZ:
@@ -4101,11 +4105,11 @@ ath10k_default_bitrate_mask(struct ath10k *ar,
if (mask->control[band].legacy != legacy)
return false;
- for (i = 0; i < ar->num_rf_chains; i++)
+ for (i = 0; i < nrf; i++)
if (mask->control[band].ht_mcs[i] != ht)
return false;
- for (i = 0; i < ar->num_rf_chains; i++)
+ for (i = 0; i < nrf; i++)
if (mask->control[band].vht_mcs[i] != vht)
return false;
@@ -4356,6 +4360,9 @@ static int ath10k_set_bitrate_mask(struct ieee80211_hw *hw,
u8 fixed_nss = ar->num_rf_chains;
u8 force_sgi;
+ if (ar->cfg_tx_chainmask)
+ fixed_nss = get_nss_from_chainmask(ar->cfg_tx_chainmask);
+
force_sgi = mask->control[band].gi;
if (force_sgi == NL80211_TXRATE_FORCE_LGI)
return -EINVAL;
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
