Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---
drivers/net/wireless/rtlwifi/core.c | 98 +++++++++++++++
drivers/net/wireless/rtlwifi/rtl8188ee/Makefile | 1 -
drivers/net/wireless/rtlwifi/rtl8188ee/hw.c | 7 +-
drivers/net/wireless/rtlwifi/rtl8188ee/phy.c | 4 -
drivers/net/wireless/rtlwifi/rtl8188ee/phy.h | 1 -
drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.c | 96 +++++++-------
drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h | 126 +++++++++----------
drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c | 135 --------------------
drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h | 94 --------------
drivers/net/wireless/rtlwifi/rtl8723ae/Makefile | 1 -
drivers/net/wireless/rtlwifi/rtl8723ae/hw.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.c | 130 -------------------
drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.h | 98 ---------------
drivers/net/wireless/rtlwifi/rtl8723be/Makefile | 1 -
drivers/net/wireless/rtlwifi/rtl8723be/hw.c | 16 +--
drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c | 2 +-
drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c | 140 ---------------------
drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h | 95 --------------
drivers/net/wireless/rtlwifi/rtl8821ae/hw.c | 7 --
20 files changed, 223 insertions(+), 833 deletions(-)
delete mode 100644 drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
delete mode 100644 drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
delete mode 100644 drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.c
delete mode 100644 drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.h
delete mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
delete mode 100644 drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index 40738e3..d30f416 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -28,6 +28,7 @@
#include "cam.h"
#include "base.h"
#include "ps.h"
+#include "pwrseqcmd.h"
#include "btcoexist/rtl_btc.h"
#include <linux/firmware.h>
@@ -1700,3 +1701,100 @@ const struct ieee80211_ops rtl_ops = {
};
EXPORT_SYMBOL_GPL(rtl_ops);
+/* Description:
+ * This routine deals with the Power Configuration CMD
+ * parsing for RTL8723/RTL8188E Series IC.
+ * Assumption:
+ * We should follow specific format that was released from HW SD.
+ */
+bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
+ u8 faversion, u8 interface_type,
+ struct wlan_pwr_cfg pwrcfgcmd[])
+{
+ struct wlan_pwr_cfg cfg_cmd = {0};
+ bool polling_bit = false;
+ u32 ary_idx = 0;
+ u8 value = 0;
+ u32 offset = 0;
+ u32 polling_count = 0;
+ u32 max_polling_cnt = 5000;
+
+ do {
+ cfg_cmd = pwrcfgcmd[ary_idx];
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): offset(%#x),cut_msk(%#x), famsk(%#x), interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), value(%#x)\n",
+ GET_PWR_CFG_OFFSET(cfg_cmd),
+ GET_PWR_CFG_CUT_MASK(cfg_cmd),
+ GET_PWR_CFG_FAB_MASK(cfg_cmd),
+ GET_PWR_CFG_INTF_MASK(cfg_cmd),
+ GET_PWR_CFG_BASE(cfg_cmd), GET_PWR_CFG_CMD(cfg_cmd),
+ GET_PWR_CFG_MASK(cfg_cmd), GET_PWR_CFG_VALUE(cfg_cmd));
+
+ if ((GET_PWR_CFG_FAB_MASK(cfg_cmd)&faversion) &&
+ (GET_PWR_CFG_CUT_MASK(cfg_cmd)&cut_version) &&
+ (GET_PWR_CFG_INTF_MASK(cfg_cmd)&interface_type)) {
+ switch (GET_PWR_CFG_CMD(cfg_cmd)) {
+ case PWR_CMD_READ:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): PWR_CMD_READ\n");
+ break;
+ case PWR_CMD_WRITE:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): PWR_CMD_WRITE\n");
+ offset = GET_PWR_CFG_OFFSET(cfg_cmd);
+
+ /*Read the value from system register*/
+ value = rtl_read_byte(rtlpriv, offset);
+ value &= (~(GET_PWR_CFG_MASK(cfg_cmd)));
+ value |= (GET_PWR_CFG_VALUE(cfg_cmd) &
+ GET_PWR_CFG_MASK(cfg_cmd));
+
+ /*Write the value back to sytem register*/
+ rtl_write_byte(rtlpriv, offset, value);
+ break;
+ case PWR_CMD_POLLING:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n");
+ polling_bit = false;
+ offset = GET_PWR_CFG_OFFSET(cfg_cmd);
+
+ do {
+ value = rtl_read_byte(rtlpriv, offset);
+
+ value &= GET_PWR_CFG_MASK(cfg_cmd);
+ if (value ==
+ (GET_PWR_CFG_VALUE(cfg_cmd) &
+ GET_PWR_CFG_MASK(cfg_cmd)))
+ polling_bit = true;
+ else
+ udelay(10);
+
+ if (polling_count++ > max_polling_cnt)
+ return false;
+ } while (!polling_bit);
+ break;
+ case PWR_CMD_DELAY:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n");
+ if (GET_PWR_CFG_VALUE(cfg_cmd) ==
+ PWRSEQ_DELAY_US)
+ udelay(GET_PWR_CFG_OFFSET(cfg_cmd));
+ else
+ mdelay(GET_PWR_CFG_OFFSET(cfg_cmd));
+ break;
+ case PWR_CMD_END:
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ "rtl_hal_pwrseqcmdparsing(): PWR_CMD_END\n");
+ return true;
+ default:
+ RT_ASSERT(false,
+ "rtl_hal_pwrseqcmdparsing(): Unknown CMD!!\n");
+ break;
+ }
+ }
+ ary_idx++;
+ } while (1);
+
+ return true;
+}
+EXPORT_SYMBOL(rtl_hal_pwrseqcmdparsing);
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile b/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
index 5b194e9..a85419a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/Makefile
@@ -5,7 +5,6 @@ rtl8188ee-objs := \
led.o \
phy.o \
pwrseq.o \
- pwrseqcmd.o \
rf.o \
sw.o \
table.o \
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
index d4709e1..f74b7fb 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c
@@ -37,7 +37,6 @@
#include "fw.h"
#include "led.h"
#include "hw.h"
-#include "pwrseqcmd.h"
#include "pwrseq.h"
#define LLT_CONFIG 5
@@ -850,7 +849,7 @@ static bool _rtl88ee_init_mac(struct ieee80211_hw *hw)
/* HW Power on sequence */
if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
- RTL8188E_NIC_ENABLE_FLOW)) {
+ RTL8188EE_NIC_ENABLE_FLOW)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"init MAC Fail as rtl_hal_pwrseqcmdparsing\n");
return false;
@@ -1422,7 +1421,7 @@ static void _rtl88ee_poweroff_adapter(struct ieee80211_hw *hw)
rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_PCI_MSK,
- RTL8188E_NIC_LPS_ENTER_FLOW);
+ RTL8188EE_NIC_LPS_ENTER_FLOW);
rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
@@ -1437,7 +1436,7 @@ static void _rtl88ee_poweroff_adapter(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_32K_CTRL, (u1b_tmp & (~BIT(0))));
rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
- PWR_INTF_PCI_MSK, RTL8188E_NIC_DISABLE_FLOW);
+ PWR_INTF_PCI_MSK, RTL8188EE_NIC_DISABLE_FLOW);
u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL+1);
rtl_write_byte(rtlpriv, REG_RSV_CTRL+1, (u1b_tmp & (~BIT(3))));
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
index 785401a..3044269 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c
@@ -2100,10 +2100,6 @@ void rtl88e_phy_lc_calibrate(struct ieee80211_hw *hw)
rtlphy->lck_inprogress = false;
}
-void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta)
-{
-}
-
void rtl88e_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain)
{
_rtl88e_phy_set_rfpath_switch(hw, bmain, false);
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
index 4dae55b..b29bd77 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h
@@ -222,7 +222,6 @@ void rtl88e_phy_set_bw_mode(struct ieee80211_hw *hw,
void rtl88e_phy_sw_chnl_callback(struct ieee80211_hw *hw);
u8 rtl88e_phy_sw_chnl(struct ieee80211_hw *hw);
void rtl88e_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
-void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta);
void rtl88e_phy_lc_calibrate(struct ieee80211_hw *hw);
void rtl88e_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
bool rtl88e_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.c b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.c
index e4e0306..ef28c8e 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.c
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.c
@@ -28,78 +28,78 @@
/* drivers should parse below arrays and do the corresponding actions */
/*3 Power on Array*/
-struct wlan_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS
- + RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_CARDEMU_TO_ACT
- RTL8188E_TRANS_END
+struct wlan_pwr_cfg rtl8188ee_power_on_flow[RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS
+ + RTL8188EE_TRANS_END_STEPS] = {
+ RTL8188EE_TRANS_CARDEMU_TO_ACT
+ RTL8188EE_TRANS_END
};
/*3Radio off GPIO Array */
-struct wlan_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS
- + RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_ACT_TO_CARDEMU
- RTL8188E_TRANS_END
+struct wlan_pwr_cfg rtl8188ee_radio_off_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
+ + RTL8188EE_TRANS_END_STEPS] = {
+ RTL8188EE_TRANS_ACT_TO_CARDEMU
+ RTL8188EE_TRANS_END
};
/*3Card Disable Array*/
-struct wlan_pwr_cfg rtl8188E_card_disable_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_ACT_TO_CARDEMU
- RTL8188E_TRANS_CARDEMU_TO_CARDDIS
- RTL8188E_TRANS_END
+struct wlan_pwr_cfg rtl8188ee_card_disable_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188EE_TRANS_END_STEPS] = {
+ RTL8188EE_TRANS_ACT_TO_CARDEMU
+ RTL8188EE_TRANS_CARDEMU_TO_CARDDIS
+ RTL8188EE_TRANS_END
};
/*3 Card Enable Array*/
-struct wlan_pwr_cfg rtl8188E_card_enable_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_CARDDIS_TO_CARDEMU
- RTL8188E_TRANS_CARDEMU_TO_ACT
- RTL8188E_TRANS_END
+struct wlan_pwr_cfg rtl8188ee_card_enable_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188EE_TRANS_END_STEPS] = {
+ RTL8188EE_TRANS_CARDDIS_TO_CARDEMU
+ RTL8188EE_TRANS_CARDEMU_TO_ACT
+ RTL8188EE_TRANS_END
};
/*3Suspend Array*/
-struct wlan_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS
- + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS
- + RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_ACT_TO_CARDEMU
- RTL8188E_TRANS_CARDEMU_TO_SUS
- RTL8188E_TRANS_END
+struct wlan_pwr_cfg rtl8188ee_suspend_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
+ + RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS
+ + RTL8188EE_TRANS_END_STEPS] = {
+ RTL8188EE_TRANS_ACT_TO_CARDEMU
+ RTL8188EE_TRANS_CARDEMU_TO_SUS
+ RTL8188EE_TRANS_END
};
/*3 Resume Array*/
-struct wlan_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS
- + RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS
- + RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_SUS_TO_CARDEMU
- RTL8188E_TRANS_CARDEMU_TO_ACT
- RTL8188E_TRANS_END
+struct wlan_pwr_cfg rtl8188ee_resume_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
+ + RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS
+ + RTL8188EE_TRANS_END_STEPS] = {
+ RTL8188EE_TRANS_SUS_TO_CARDEMU
+ RTL8188EE_TRANS_CARDEMU_TO_ACT
+ RTL8188EE_TRANS_END
};
/*3HWPDN Array*/
-struct wlan_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS
- + RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS
- + RTL8188E_TRANS_END_STEPS] = {
- RTL8188E_TRANS_ACT_TO_CARDEMU
- RTL8188E_TRANS_CARDEMU_TO_PDN
- RTL8188E_TRANS_END
+struct wlan_pwr_cfg rtl8188ee_hwpdn_flow[RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS
+ + RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS
+ + RTL8188EE_TRANS_END_STEPS] = {
+ RTL8188EE_TRANS_ACT_TO_CARDEMU
+ RTL8188EE_TRANS_CARDEMU_TO_PDN
+ RTL8188EE_TRANS_END
};
/*3 Enter LPS */
-struct wlan_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS
- + RTL8188E_TRANS_END_STEPS] = {
+struct wlan_pwr_cfg rtl8188ee_enter_lps_flow[RTL8188EE_TRANS_ACT_TO_LPS_STEPS
+ + RTL8188EE_TRANS_END_STEPS] = {
/*FW behavior*/
- RTL8188E_TRANS_ACT_TO_LPS
- RTL8188E_TRANS_END
+ RTL8188EE_TRANS_ACT_TO_LPS
+ RTL8188EE_TRANS_END
};
/*3 Leave LPS */
-struct wlan_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS
- + RTL8188E_TRANS_END_STEPS] = {
+struct wlan_pwr_cfg rtl8188ee_leave_lps_flow[RTL8188EE_TRANS_LPS_TO_ACT_STEPS
+ + RTL8188EE_TRANS_END_STEPS] = {
/*FW behavior*/
- RTL8188E_TRANS_LPS_TO_ACT
- RTL8188E_TRANS_END
+ RTL8188EE_TRANS_LPS_TO_ACT
+ RTL8188EE_TRANS_END
};
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
index 970afe6..7910334 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
@@ -27,7 +27,7 @@
#define __RTL8723E_PWRSEQ_H__
#include "pwrseqcmd.h"
-/* Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
+/* Check document WM-20110607-Paul-RTL8188EE_Power_Architecture-R02.vsd
* There are 6 HW Power States:
* 0: POFF--Power Off
* 1: PDN--Power Down
@@ -46,24 +46,24 @@
* TRANS_LPS_TO_ACT
*
* TRANS_END
- * PWR SEQ Version: rtl8188E_PwrSeq_V09.h
+ * PWR SEQ Version: rtl8188ee_PwrSeq_V09.h
*/
-#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
-#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
-#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
-#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
-#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
-#define RTL8188E_TRANS_END_STEPS 1
+#define RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS 10
+#define RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS 10
+#define RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS 10
+#define RTL8188EE_TRANS_SUS_TO_CARDEMU_STEPS 10
+#define RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS 10
+#define RTL8188EE_TRANS_PDN_TO_CARDEMU_STEPS 10
+#define RTL8188EE_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8188EE_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8188EE_TRANS_END_STEPS 1
/* The following macros have the following format:
* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
* comments },
*/
-#define RTL8188E_TRANS_CARDEMU_TO_ACT \
+#define RTL8188EE_TRANS_CARDEMU_TO_ACT \
{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1) \
/* wait till 0x04[17] = 1 power ready*/}, \
@@ -92,7 +92,7 @@
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \
/*SDIO Driving*/},
-#define RTL8188E_TRANS_ACT_TO_CARDEMU \
+#define RTL8188EE_TRANS_ACT_TO_CARDEMU \
{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
/*0x1F[7:0] = 0 turn off RF*/}, \
@@ -106,7 +106,7 @@
PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0 \
/*wait till 0x04[9] = 0 polling until return 0 to disable*/},
-#define RTL8188E_TRANS_CARDEMU_TO_SUS \
+#define RTL8188EE_TRANS_CARDEMU_TO_SUS \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3) \
@@ -133,7 +133,7 @@
PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0 \
/*wait power state to suspend*/},
-#define RTL8188E_TRANS_SUS_TO_CARDEMU \
+#define RTL8188EE_TRANS_SUS_TO_CARDEMU \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0 \
/*Set SDIO suspend local register*/}, \
@@ -144,7 +144,7 @@
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0 \
/*0x04[12:11] = 2b'01enable WL suspend*/},
-#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
+#define RTL8188EE_TRANS_CARDEMU_TO_CARDDIS \
{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7) \
/*0x24[23] = 2b'01 schmit trigger */}, \
@@ -170,7 +170,7 @@
PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0 \
/*wait power state to suspend*/},
-#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
+#define RTL8188EE_TRANS_CARDDIS_TO_CARDEMU \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0 \
/*Set SDIO suspend local register*/}, \
@@ -181,18 +181,18 @@
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0 \
/*0x04[12:11] = 2b'01enable WL suspend*/},
-#define RTL8188E_TRANS_CARDEMU_TO_PDN \
+#define RTL8188EE_TRANS_CARDEMU_TO_PDN \
{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0/* 0x04[16] = 0*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7) \
/* 0x04[15] = 1*/},
-#define RTL8188E_TRANS_PDN_TO_CARDEMU \
+#define RTL8188EE_TRANS_PDN_TO_CARDEMU \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0/* 0x04[15] = 0*/},
-#define RTL8188E_TRANS_ACT_TO_LPS \
+#define RTL8188EE_TRANS_ACT_TO_LPS \
{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F \
/*Tx Pause*/}, \
@@ -225,7 +225,7 @@
/*Respond TxOK to scheduler*/},
-#define RTL8188E_TRANS_LPS_TO_ACT \
+#define RTL8188EE_TRANS_LPS_TO_ACT \
{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84 \
/*SDIO RPWM*/}, \
@@ -260,52 +260,52 @@
PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
/*. 0x522 = 0*/},
-#define RTL8188E_TRANS_END \
+#define RTL8188EE_TRANS_END \
{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
0, PWR_CMD_END, 0, 0}
-extern struct wlan_pwr_cfg rtl8188E_power_on_flow
- [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188E_radio_off_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188E_card_disable_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188E_card_enable_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188E_suspend_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188E_resume_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188E_hwpdn_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188E_enter_lps_flow
- [RTL8188E_TRANS_ACT_TO_LPS_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188E_leave_lps_flow
- [RTL8188E_TRANS_LPS_TO_ACT_STEPS +
- RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_power_on_flow
+ [RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_radio_off_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_card_disable_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_card_enable_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_suspend_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_resume_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_hwpdn_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_enter_lps_flow
+ [RTL8188EE_TRANS_ACT_TO_LPS_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_leave_lps_flow
+ [RTL8188EE_TRANS_LPS_TO_ACT_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
/* RTL8723 Power Configuration CMDs for PCIe interface */
-#define RTL8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow
-#define RTL8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow
-#define RTL8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow
-#define RTL8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow
-#define RTL8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow
-#define RTL8188E_NIC_RESUME_FLOW rtl8188E_resume_flow
-#define RTL8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow
-#define RTL8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow
-#define RTL8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow
+#define RTL8188EE_NIC_PWR_ON_FLOW rtl8188ee_power_on_flow
+#define RTL8188EE_NIC_RF_OFF_FLOW rtl8188ee_radio_off_flow
+#define RTL8188EE_NIC_DISABLE_FLOW rtl8188ee_card_disable_flow
+#define RTL8188EE_NIC_ENABLE_FLOW rtl8188ee_card_enable_flow
+#define RTL8188EE_NIC_SUSPEND_FLOW rtl8188ee_suspend_flow
+#define RTL8188EE_NIC_RESUME_FLOW rtl8188ee_resume_flow
+#define RTL8188EE_NIC_PDN_FLOW rtl8188ee_hwpdn_flow
+#define RTL8188EE_NIC_LPS_ENTER_FLOW rtl8188ee_enter_lps_flow
+#define RTL8188EE_NIC_LPS_LEAVE_FLOW rtl8188ee_leave_lps_flow
#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
deleted file mode 100644
index eceedcd..0000000
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2009-2013 Realtek Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * wlanfae <wlanfae@xxxxxxxxxxx>
- * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
- * Hsinchu 300, Taiwan.
- *
- * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- *
- *****************************************************************************/
-
-#include "pwrseqcmd.h"
-#include "pwrseq.h"
-
-
-/* Description:
-* This routine deal with the Power Configuration CMDs
-* parsing for RTL8723/RTL8188E Series IC.
-* Assumption:
-* We should follow specific format which was released from HW SD.
-*
-* 2011.07.07, added by Roger.
-*/
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 fab_version, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[])
-
-{
- struct wlan_pwr_cfg pwr_cfg_cmd = {0};
- bool b_polling_bit = false;
- u32 ary_idx = 0;
- u8 value = 0;
- u32 offset = 0;
- u32 polling_count = 0;
- u32 max_polling_cnt = 5000;
-
- do {
- pwr_cfg_cmd = pwrcfgcmd[ary_idx];
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): offset(%#x),cut_msk(%#x), fab_msk(%#x), interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), value(%#x)\n",
- GET_PWR_CFG_OFFSET(pwr_cfg_cmd),
- GET_PWR_CFG_CUT_MASK(pwr_cfg_cmd),
- GET_PWR_CFG_FAB_MASK(pwr_cfg_cmd),
- GET_PWR_CFG_INTF_MASK(pwr_cfg_cmd),
- GET_PWR_CFG_BASE(pwr_cfg_cmd),
- GET_PWR_CFG_CMD(pwr_cfg_cmd),
- GET_PWR_CFG_MASK(pwr_cfg_cmd),
- GET_PWR_CFG_VALUE(pwr_cfg_cmd));
-
- if ((GET_PWR_CFG_FAB_MASK(pwr_cfg_cmd)&fab_version) &&
- (GET_PWR_CFG_CUT_MASK(pwr_cfg_cmd)&cut_version) &&
- (GET_PWR_CFG_INTF_MASK(pwr_cfg_cmd)&interface_type)) {
- switch (GET_PWR_CFG_CMD(pwr_cfg_cmd)) {
- case PWR_CMD_READ:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_READ\n");
- break;
- case PWR_CMD_WRITE:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_WRITE\n");
- offset = GET_PWR_CFG_OFFSET(pwr_cfg_cmd);
-
- /*Read the value from system register*/
- value = rtl_read_byte(rtlpriv, offset);
- value &= (~(GET_PWR_CFG_MASK(pwr_cfg_cmd)));
- value |= (GET_PWR_CFG_VALUE(pwr_cfg_cmd)
- & GET_PWR_CFG_MASK(pwr_cfg_cmd));
-
- /*Write the back to sytem register*/
- rtl_write_byte(rtlpriv, offset, value);
- break;
- case PWR_CMD_POLLING:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n");
- b_polling_bit = false;
- offset = GET_PWR_CFG_OFFSET(pwr_cfg_cmd);
-
- do {
- value = rtl_read_byte(rtlpriv, offset);
-
- value &= GET_PWR_CFG_MASK(pwr_cfg_cmd);
- if (value ==
- (GET_PWR_CFG_VALUE(pwr_cfg_cmd) &
- GET_PWR_CFG_MASK(pwr_cfg_cmd)))
- b_polling_bit = true;
- else
- udelay(10);
-
- if (polling_count++ > max_polling_cnt) {
- RT_TRACE(rtlpriv, COMP_INIT,
- DBG_LOUD,
- "polling fail in pwrseqcmd\n");
- return false;
- }
- } while (!b_polling_bit);
-
- break;
- case PWR_CMD_DELAY:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n");
- if (GET_PWR_CFG_VALUE(pwr_cfg_cmd) ==
- PWRSEQ_DELAY_US)
- udelay(GET_PWR_CFG_OFFSET(pwr_cfg_cmd));
- else
- mdelay(GET_PWR_CFG_OFFSET(pwr_cfg_cmd));
- break;
- case PWR_CMD_END:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_END\n");
- return true;
- default:
- RT_ASSERT(false,
- "rtl_hal_pwrseqcmdparsing(): Unknown CMD!!\n");
- break;
- }
- }
- ary_idx++;
- } while (1);
-
- return true;
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
deleted file mode 100644
index dff77a5..0000000
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseqcmd.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2009-2013 Realtek Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * wlanfae <wlanfae@xxxxxxxxxxx>
- * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
- * Hsinchu 300, Taiwan.
- *
- * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- *
- *****************************************************************************/
-
-#ifndef __RTL8723E_PWRSEQCMD_H__
-#define __RTL8723E_PWRSEQCMD_H__
-
-#include "../wifi.h"
-/*---------------------------------------------*/
-/* The value of cmd: 4 bits */
-/*---------------------------------------------*/
-#define PWR_CMD_READ 0x00
-#define PWR_CMD_WRITE 0x01
-#define PWR_CMD_POLLING 0x02
-#define PWR_CMD_DELAY 0x03
-#define PWR_CMD_END 0x04
-
-/* define the base address of each block */
-#define PWR_BASEADDR_MAC 0x00
-#define PWR_BASEADDR_USB 0x01
-#define PWR_BASEADDR_PCIE 0x02
-#define PWR_BASEADDR_SDIO 0x03
-
-#define PWR_INTF_SDIO_MSK BIT(0)
-#define PWR_INTF_USB_MSK BIT(1)
-#define PWR_INTF_PCI_MSK BIT(2)
-#define PWR_INTF_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
-
-#define PWR_FAB_TSMC_MSK BIT(0)
-#define PWR_FAB_UMC_MSK BIT(1)
-#define PWR_FAB_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
-
-#define PWR_CUT_TESTCHIP_MSK BIT(0)
-#define PWR_CUT_A_MSK BIT(1)
-#define PWR_CUT_B_MSK BIT(2)
-#define PWR_CUT_C_MSK BIT(3)
-#define PWR_CUT_D_MSK BIT(4)
-#define PWR_CUT_E_MSK BIT(5)
-#define PWR_CUT_F_MSK BIT(6)
-#define PWR_CUT_G_MSK BIT(7)
-#define PWR_CUT_ALL_MSK 0xFF
-
-enum pwrseq_delay_unit {
- PWRSEQ_DELAY_US,
- PWRSEQ_DELAY_MS,
-};
-
-struct wlan_pwr_cfg {
- u16 offset;
- u8 cut_msk;
- u8 fab_msk:4;
- u8 interface_msk:4;
- u8 base:4;
- u8 cmd:4;
- u8 msk;
- u8 value;
-
-};
-
-#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
-#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
-#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) __PWR_CMD.fab_msk
-#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk
-#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
-#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd
-#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk
-#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
-
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 fab_version, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[]);
-
-#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile b/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile
index 4ed731f..9c34a85 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/Makefile
@@ -10,7 +10,6 @@ rtl8723ae-objs := \
led.o \
phy.o \
pwrseq.o \
- pwrseqcmd.o \
rf.o \
sw.o \
table.o \
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
index dd8e76c..3338206a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c
@@ -43,7 +43,7 @@
#include "../rtl8723com/fw_common.h"
#include "led.h"
#include "hw.h"
-#include "pwrseqcmd.h"
+#include "../pwrseqcmd.h"
#include "pwrseq.h"
#include "btc.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.c b/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.c
index df6ca9a..f907d7f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseq.c
@@ -27,7 +27,7 @@
*
*****************************************************************************/
-#include "pwrseqcmd.h"
+#include "../pwrseqcmd.h"
#include "pwrseq.h"
/* drivers should parse arrays below and do the corresponding actions */
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.c
deleted file mode 100644
index 239eb44..0000000
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2009-2012 Realtek Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * wlanfae <wlanfae@xxxxxxxxxxx>
- * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
- * Hsinchu 300, Taiwan.
- *
- * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- *
- *****************************************************************************/
-
-#include "pwrseqcmd.h"
-#include "pwrseq.h"
-
-/* Description:
- * This routine deals with the Power Configuration CMD
- * parsing for RTL8723/RTL8188E Series IC.
- * Assumption:
- * We should follow specific format that was released from HW SD.
- */
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 faversion, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[])
-{
- struct wlan_pwr_cfg cfg_cmd = {0};
- bool polling_bit = false;
- u32 ary_idx = 0;
- u8 value = 0;
- u32 offset = 0;
- u32 polling_count = 0;
- u32 max_polling_cnt = 5000;
-
- do {
- cfg_cmd = pwrcfgcmd[ary_idx];
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): offset(%#x),cut_msk(%#x), famsk(%#x),"
- "interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), value(%#x)\n",
- GET_PWR_CFG_OFFSET(cfg_cmd),
- GET_PWR_CFG_CUT_MASK(cfg_cmd),
- GET_PWR_CFG_FAB_MASK(cfg_cmd),
- GET_PWR_CFG_INTF_MASK(cfg_cmd),
- GET_PWR_CFG_BASE(cfg_cmd), GET_PWR_CFG_CMD(cfg_cmd),
- GET_PWR_CFG_MASK(cfg_cmd), GET_PWR_CFG_VALUE(cfg_cmd));
-
- if ((GET_PWR_CFG_FAB_MASK(cfg_cmd)&faversion) &&
- (GET_PWR_CFG_CUT_MASK(cfg_cmd)&cut_version) &&
- (GET_PWR_CFG_INTF_MASK(cfg_cmd)&interface_type)) {
- switch (GET_PWR_CFG_CMD(cfg_cmd)) {
- case PWR_CMD_READ:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_READ\n");
- break;
- case PWR_CMD_WRITE:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_WRITE\n");
- offset = GET_PWR_CFG_OFFSET(cfg_cmd);
-
- /*Read the value from system register*/
- value = rtl_read_byte(rtlpriv, offset);
- value &= (~(GET_PWR_CFG_MASK(cfg_cmd)));
- value |= (GET_PWR_CFG_VALUE(cfg_cmd) &
- GET_PWR_CFG_MASK(cfg_cmd));
-
- /*Write the value back to sytem register*/
- rtl_write_byte(rtlpriv, offset, value);
- break;
- case PWR_CMD_POLLING:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n");
- polling_bit = false;
- offset = GET_PWR_CFG_OFFSET(cfg_cmd);
-
- do {
- value = rtl_read_byte(rtlpriv, offset);
-
- value &= GET_PWR_CFG_MASK(cfg_cmd);
- if (value ==
- (GET_PWR_CFG_VALUE(cfg_cmd)
- & GET_PWR_CFG_MASK(cfg_cmd)))
- polling_bit = true;
- else
- udelay(10);
-
- if (polling_count++ > max_polling_cnt)
- return false;
- } while (!polling_bit);
- break;
- case PWR_CMD_DELAY:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n");
- if (GET_PWR_CFG_VALUE(cfg_cmd) ==
- PWRSEQ_DELAY_US)
- udelay(GET_PWR_CFG_OFFSET(cfg_cmd));
- else
- mdelay(GET_PWR_CFG_OFFSET(cfg_cmd));
- break;
- case PWR_CMD_END:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtl_hal_pwrseqcmdparsing(): PWR_CMD_END\n");
- return true;
- default:
- RT_ASSERT(false,
- "rtl_hal_pwrseqcmdparsing(): Unknown CMD!!\n");
- break;
- }
-
- }
- ary_idx++;
- } while (1);
-
- return true;
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.h b/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.h
deleted file mode 100644
index 6e0f3ea..0000000
--- a/drivers/net/wireless/rtlwifi/rtl8723ae/pwrseqcmd.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2009-2012 Realtek Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * wlanfae <wlanfae@xxxxxxxxxxx>
- * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
- * Hsinchu 300, Taiwan.
- *
- * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- *
- *****************************************************************************/
-
-#ifndef __RTL8723E_PWRSEQCMD_H__
-#define __RTL8723E_PWRSEQCMD_H__
-
-#include "../wifi.h"
-/*---------------------------------------------
- * 3 The value of cmd: 4 bits
- *---------------------------------------------
- */
-#define PWR_CMD_READ 0x00
-#define PWR_CMD_WRITE 0x01
-#define PWR_CMD_POLLING 0x02
-#define PWR_CMD_DELAY 0x03
-#define PWR_CMD_END 0x04
-
-/* define the base address of each block */
-#define PWR_BASEADDR_MAC 0x00
-#define PWR_BASEADDR_USB 0x01
-#define PWR_BASEADDR_PCIE 0x02
-#define PWR_BASEADDR_SDIO 0x03
-
-#define PWR_INTF_SDIO_MSK BIT(0)
-#define PWR_INTF_USB_MSK BIT(1)
-#define PWR_INTF_PCI_MSK BIT(2)
-#define PWR_INTF_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
-
-#define PWR_FAB_TSMC_MSK BIT(0)
-#define PWR_FAB_UMC_MSK BIT(1)
-#define PWR_FAB_ALL_MSK (BIT(0)|BIT(1)|BIT(2)|BIT(3))
-
-#define PWR_CUT_TESTCHIP_MSK BIT(0)
-#define PWR_CUT_A_MSK BIT(1)
-#define PWR_CUT_B_MSK BIT(2)
-#define PWR_CUT_C_MSK BIT(3)
-#define PWR_CUT_D_MSK BIT(4)
-#define PWR_CUT_E_MSK BIT(5)
-#define PWR_CUT_F_MSK BIT(6)
-#define PWR_CUT_G_MSK BIT(7)
-#define PWR_CUT_ALL_MSK 0xFF
-
-enum pwrseq_delay_unit {
- PWRSEQ_DELAY_US,
- PWRSEQ_DELAY_MS,
-};
-
-struct wlan_pwr_cfg {
- u16 offset;
- u8 cut_msk;
- u8 fab_msk:4;
- u8 interface_msk:4;
- u8 base:4;
- u8 cmd:4;
- u8 msk;
- u8 value;
-};
-
-#define GET_PWR_CFG_OFFSET(__PWR_CMD) (__PWR_CMD.offset)
-#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) (__PWR_CMD.cut_msk)
-#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) (__PWR_CMD.fab_msk)
-#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) (__PWR_CMD.interface_msk)
-#define GET_PWR_CFG_BASE(__PWR_CMD) (__PWR_CMD.base)
-#define GET_PWR_CFG_CMD(__PWR_CMD) (__PWR_CMD.cmd)
-#define GET_PWR_CFG_MASK(__PWR_CMD) (__PWR_CMD.msk)
-#define GET_PWR_CFG_VALUE(__PWR_CMD) (__PWR_CMD.value)
-
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 fab_version, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[]);
-
-#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/Makefile b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
index 4a75aab..59e416a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/Makefile
@@ -8,7 +8,6 @@ rtl8723be-objs := \
led.o \
phy.o \
pwrseq.o \
- pwrseqcmd.o \
rf.o \
sw.o \
table.o \
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
index 1b93918..c0689c1 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
@@ -39,7 +39,7 @@
#include "../rtl8723com/fw_common.h"
#include "led.h"
#include "hw.h"
-#include "pwrseqcmd.h"
+#include "../pwrseqcmd.h"
#include "pwrseq.h"
#include "../btcoexist/rtl_btc.h"
@@ -815,9 +815,9 @@ static bool _rtl8723be_init_mac(struct ieee80211_hw *hw)
mac_func_enable = false;
/* HW Power on sequence */
- if (!rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
- PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
- RTL8723_NIC_ENABLE_FLOW)) {
+ if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK,
+ PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK,
+ RTL8723_NIC_ENABLE_FLOW)) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"init MAC Fail as power on failure\n");
return false;
@@ -1306,8 +1306,8 @@ static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
/* Combo (PCIe + USB) Card and PCIe-MF Card */
/* 1. Run LPS WL RFOFF flow */
- rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
- PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
+ rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+ PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
/* 2. 0x1F[7:0] = 0 */
/* turn off RF */
@@ -1325,8 +1325,8 @@ static void _rtl8723be_poweroff_adapter(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
/* HW card disable configuration. */
- rtlbe_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
- PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
+ rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
+ PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
/* Reset MCU IO Wrapper */
u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
index b5167e7..a1bb1f6 100644
--- a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
+++ b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseq.c
@@ -23,7 +23,7 @@
*
*****************************************************************************/
-#include "pwrseqcmd.h"
+#include "../pwrseqcmd.h"
#include "pwrseq.h"
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
deleted file mode 100644
index cf57a49..0000000
--- a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2009-2014 Realtek Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * wlanfae <wlanfae@xxxxxxxxxxx>
- * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
- * Hsinchu 300, Taiwan.
- *
- * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- *
- *****************************************************************************/
-
-#include "pwrseqcmd.h"
-#include "pwrseq.h"
-
-/* Description:
- * This routine deal with the Power Configuration CMDs
- * parsing for RTL8723/RTL8188E Series IC.
- * Assumption:
- * We should follow specific format which was released from HW SD.
- *
- * 2011.07.07, added by Roger.
- */
-bool rtlbe_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 fab_version, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[])
-
-{
- struct wlan_pwr_cfg pwr_cfg_cmd = {0};
- bool b_polling_bit = false;
- u32 ary_idx = 0;
- u8 value = 0;
- u32 offset = 0;
- u32 polling_count = 0;
- u32 max_polling_cnt = 5000;
-
- do {
- pwr_cfg_cmd = pwrcfgcmd[ary_idx];
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtlbe_hal_pwrseqcmdparsing(): "
- "offset(%#x),cut_msk(%#x), fab_msk(%#x),"
- "interface_msk(%#x), base(%#x), "
- "cmd(%#x), msk(%#x), value(%#x)\n",
- GET_PWR_CFG_OFFSET(pwr_cfg_cmd),
- GET_PWR_CFG_CUT_MASK(pwr_cfg_cmd),
- GET_PWR_CFG_FAB_MASK(pwr_cfg_cmd),
- GET_PWR_CFG_INTF_MASK(pwr_cfg_cmd),
- GET_PWR_CFG_BASE(pwr_cfg_cmd),
- GET_PWR_CFG_CMD(pwr_cfg_cmd),
- GET_PWR_CFG_MASK(pwr_cfg_cmd),
- GET_PWR_CFG_VALUE(pwr_cfg_cmd));
-
- if ((GET_PWR_CFG_FAB_MASK(pwr_cfg_cmd)&fab_version) &&
- (GET_PWR_CFG_CUT_MASK(pwr_cfg_cmd)&cut_version) &&
- (GET_PWR_CFG_INTF_MASK(pwr_cfg_cmd)&interface_type)) {
- switch (GET_PWR_CFG_CMD(pwr_cfg_cmd)) {
- case PWR_CMD_READ:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtlbe_hal_pwrseqcmdparsing(): "
- "PWR_CMD_READ\n");
- break;
- case PWR_CMD_WRITE:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtlbe_hal_pwrseqcmdparsing(): "
- "PWR_CMD_WRITE\n");
- offset = GET_PWR_CFG_OFFSET(pwr_cfg_cmd);
-
- /*Read the value from system register*/
- value = rtl_read_byte(rtlpriv, offset);
- value &= (~(GET_PWR_CFG_MASK(pwr_cfg_cmd)));
- value = value | (GET_PWR_CFG_VALUE(pwr_cfg_cmd)
- & GET_PWR_CFG_MASK(pwr_cfg_cmd));
-
- /*Write the value back to sytem register*/
- rtl_write_byte(rtlpriv, offset, value);
- break;
- case PWR_CMD_POLLING:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtlbe_hal_pwrseqcmdparsing(): "
- "PWR_CMD_POLLING\n");
- b_polling_bit = false;
- offset = GET_PWR_CFG_OFFSET(pwr_cfg_cmd);
-
- do {
- value = rtl_read_byte(rtlpriv, offset);
-
- value &= GET_PWR_CFG_MASK(pwr_cfg_cmd);
- if (value ==
- (GET_PWR_CFG_VALUE(pwr_cfg_cmd) &
- GET_PWR_CFG_MASK(pwr_cfg_cmd)))
- b_polling_bit = true;
- else
- udelay(10);
-
- if (polling_count++ > max_polling_cnt)
- return false;
-
- } while (!b_polling_bit);
- break;
- case PWR_CMD_DELAY:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtlbe_hal_pwrseqcmdparsing(): "
- "PWR_CMD_DELAY\n");
- if (GET_PWR_CFG_VALUE(pwr_cfg_cmd) ==
- PWRSEQ_DELAY_US)
- udelay(GET_PWR_CFG_OFFSET(pwr_cfg_cmd));
- else
- mdelay(GET_PWR_CFG_OFFSET(pwr_cfg_cmd));
- break;
- case PWR_CMD_END:
- RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
- "rtlbe_hal_pwrseqcmdparsing(): "
- "PWR_CMD_END\n");
- return true;
- default:
- RT_ASSERT(false,
- "rtlbe_hal_pwrseqcmdparsing(): "
- "Unknown CMD!!\n");
- break;
- }
- }
-
- ary_idx++;
- } while (1);
-
- return true;
-}
diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h b/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
deleted file mode 100644
index ce14a3b..0000000
--- a/drivers/net/wireless/rtlwifi/rtl8723be/pwrseqcmd.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2009-2014 Realtek Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * wlanfae <wlanfae@xxxxxxxxxxx>
- * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
- * Hsinchu 300, Taiwan.
- *
- * Larry Finger <Larry.Finger@xxxxxxxxxxxx>
- *
- *****************************************************************************/
-
-#ifndef __RTL8723BE_PWRSEQCMD_H__
-#define __RTL8723BE_PWRSEQCMD_H__
-
-#include "../wifi.h"
-/*---------------------------------------------*/
-/*The value of cmd: 4 bits */
-/*---------------------------------------------*/
-#define PWR_CMD_READ 0x00
-#define PWR_CMD_WRITE 0x01
-#define PWR_CMD_POLLING 0x02
-#define PWR_CMD_DELAY 0x03
-#define PWR_CMD_END 0x04
-
-/* define the base address of each block */
-#define PWR_BASEADDR_MAC 0x00
-#define PWR_BASEADDR_USB 0x01
-#define PWR_BASEADDR_PCIE 0x02
-#define PWR_BASEADDR_SDIO 0x03
-
-#define PWR_INTF_SDIO_MSK BIT(0)
-#define PWR_INTF_USB_MSK BIT(1)
-#define PWR_INTF_PCI_MSK BIT(2)
-#define PWR_INTF_ALL_MSK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-#define PWR_FAB_TSMC_MSK BIT(0)
-#define PWR_FAB_UMC_MSK BIT(1)
-#define PWR_FAB_ALL_MSK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-#define PWR_CUT_TESTCHIP_MSK BIT(0)
-#define PWR_CUT_A_MSK BIT(1)
-#define PWR_CUT_B_MSK BIT(2)
-#define PWR_CUT_C_MSK BIT(3)
-#define PWR_CUT_D_MSK BIT(4)
-#define PWR_CUT_E_MSK BIT(5)
-#define PWR_CUT_F_MSK BIT(6)
-#define PWR_CUT_G_MSK BIT(7)
-#define PWR_CUT_ALL_MSK 0xFF
-
-
-enum pwrseq_delay_unit {
- PWRSEQ_DELAY_US,
- PWRSEQ_DELAY_MS,
-};
-
-struct wlan_pwr_cfg {
- u16 offset;
- u8 cut_msk;
- u8 fab_msk:4;
- u8 interface_msk:4;
- u8 base:4;
- u8 cmd:4;
- u8 msk;
- u8 value;
-
-};
-
-#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset
-#define GET_PWR_CFG_CUT_MASK(__PWR_CMD) __PWR_CMD.cut_msk
-#define GET_PWR_CFG_FAB_MASK(__PWR_CMD) __PWR_CMD.fab_msk
-#define GET_PWR_CFG_INTF_MASK(__PWR_CMD) __PWR_CMD.interface_msk
-#define GET_PWR_CFG_BASE(__PWR_CMD) __PWR_CMD.base
-#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd
-#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk
-#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value
-
-bool rtlbe_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 fab_version, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[]);
-
-#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
index edb7557..58bbaf4 100644
--- a/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8821ae/hw.c
@@ -43,13 +43,6 @@
#define LLT_CONFIG 5
-bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version,
- u8 faversion, u8 interface_type,
- struct wlan_pwr_cfg pwrcfgcmd[])
-{
- return false;
-}
-
static void _rtl8821ae_return_beacon_queue_skb(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
