Set control frame bit in rx filter if dynack processing has been activated in order to enable ACK frame reception Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx> --- drivers/net/wireless/ath/ath9k/recv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 66c5fe8..42108f0 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -400,7 +400,8 @@ u32 ath_calcrxfilter(struct ath_softc *sc) if (sc->sc_ah->is_monitoring) rfilt |= ATH9K_RX_FILTER_PROM; - if (sc->cur_chan->rxfilter & FIF_CONTROL) + if ((sc->cur_chan->rxfilter & FIF_CONTROL) || + sc->sc_ah->dynack.enabled) rfilt |= ATH9K_RX_FILTER_CONTROL; if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) && -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
