Hi Guys,
I have several serious regressions since the rtl8187se staging driver
was merged into the generic rtl818x_pci driver with kernel 3.15.
With my Netbook for travels I have now...
1. Wireless transfer rate dropped seriously from about 2.5 MByte/s
crushed down to 700 kByte/s in Linux kernels 3.15 and 3.16!
2. Signal rate always says 15% even if I'm right next to the WLAN
router! No possibility any more to determine which WLAN router is the
strongest (most nearby) in hotels. Weaker WLANs in neighborhood seems
not to be shown also because of this weakness.
3. The device can not be switched off any more by keyboard or plasma-nm
and is always switched on - security risk!
I'm now forced to go back to 3.14 - and the staging driver for rtl8187se
- where I only can find an early 3.14.4 on my private local copy of OBS
stable kernels.
There, with 3.14, everything is back to normal!
I like to test the newest kernels but this seriously prevents me.
BTW, I'm not the only one facing these problems:
http://www.pclinuxos.com/forum/index.php?topic=127276.0
Here some data:
:~ # iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: BC:xx:xx:xx:xx:3D
Channel:3
Frequency:2.422 GHz (Channel 3)
Quality=15/100 Signal level=15/100
Encryption key:on
ESSID:"xxxxxxxxxxxxxxxx"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=000011886cd93c9c
Extra: Last beacon: 6ms ago
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
:~ # lspci -vvv
05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE
Wireless LAN Controller (rev 22)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless
LAN Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<128ns, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq-
AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt-
UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn-
ChkCap+ ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128-
WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-xx-xx-xx-xx-10-00
Kernel driver in use: rtl818x_pci
Kernel modules: rtl818x_pci
:~ # iwconfig
eth0 no wireless extensions.
lo no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"xxxxxxxxxxxx"
Mode:Managed Frequency:2.422 GHz Access Point:
xx:xx:xx:xx:xx:3D
Bit Rate=11 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=15/100 Signal level=15/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:430 Invalid misc:486 Missed beacon:0
:~ # ifconfig
wlan0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:AD
inet addr:xx.xx.xx.1 Bcast:xx.xx.xx.255 Mask:255.255.255.0
inet6 addr: xxxx::xxx:xxxx:xxxx:xxxx/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3321100 errors:0 dropped:0 overruns:0 frame:0
TX packets:1946015 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4926099909 (4697.8 Mb) TX bytes:182336218 (173.8 Mb)
Best regards
Ralf
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
