From: Eliad Peller <eliad@xxxxxxxxxx>
By default, when uapsd is not used, the ucode uses
null data packet to exit power-save and get then
pending frames.
However, some tests require the explicit usage of ps-poll.
Allow setting use_ps_poll power option (through debugfs)
to configure the ucode to use ps-poll instead.
The ucode configuration is done by setting the advanced-pm
flag while setting all the ACs to non-upasd mode.
Signed-off-by: Eliad Peller <eliadx.peller@xxxxxxxxx>
Reviewed-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@xxxxxxxxx>
---
drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c | 8 ++++++++
drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 ++
drivers/net/wireless/iwlwifi/mvm/power.c | 9 ++++++++-
3 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
index 2e90ff7..5f5a94b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
+++ b/drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c
@@ -119,6 +119,10 @@ static void iwl_dbgfs_update_pm(struct iwl_mvm *mvm,
IWL_DEBUG_POWER(mvm, "uapsd_misbehaving_enable=%d\n", val);
dbgfs_pm->uapsd_misbehaving = val;
break;
+ case MVM_DEBUGFS_PM_USE_PS_POLL:
+ IWL_DEBUG_POWER(mvm, "use_ps_poll=%d\n", val);
+ dbgfs_pm->use_ps_poll = val;
+ break;
}
}
@@ -169,6 +173,10 @@ static ssize_t iwl_dbgfs_pm_params_write(struct ieee80211_vif *vif, char *buf,
if (sscanf(buf + 18, "%d", &val) != 1)
return -EINVAL;
param = MVM_DEBUGFS_PM_UAPSD_MISBEHAVING;
+ } else if (!strncmp("use_ps_poll=", buf, 12)) {
+ if (sscanf(buf + 12, "%d", &val) != 1)
+ return -EINVAL;
+ param = MVM_DEBUGFS_PM_USE_PS_POLL;
} else {
return -EINVAL;
}
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 771cf46..83a00ab 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -203,6 +203,7 @@ enum iwl_dbgfs_pm_mask {
MVM_DEBUGFS_PM_LPRX_RSSI_THRESHOLD = BIT(7),
MVM_DEBUGFS_PM_SNOOZE_ENABLE = BIT(8),
MVM_DEBUGFS_PM_UAPSD_MISBEHAVING = BIT(9),
+ MVM_DEBUGFS_PM_USE_PS_POLL = BIT(10),
};
struct iwl_dbgfs_pm {
@@ -215,6 +216,7 @@ struct iwl_dbgfs_pm {
u32 lprx_rssi_threshold;
bool snooze_ena;
bool uapsd_misbehaving;
+ bool use_ps_poll;
int mask;
};
diff --git a/drivers/net/wireless/iwlwifi/mvm/power.c b/drivers/net/wireless/iwlwifi/mvm/power.c
index 2b2d108..8cbe7ea 100644
--- a/drivers/net/wireless/iwlwifi/mvm/power.c
+++ b/drivers/net/wireless/iwlwifi/mvm/power.c
@@ -198,8 +198,15 @@ static void iwl_mvm_power_configure_uapsd(struct iwl_mvm *mvm,
}
}
- if (!(cmd->flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK)))
+ if (!(cmd->flags & cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK))) {
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+ /* set advanced pm flag with no uapsd ACs to enable ps-poll */
+ if (mvmvif->dbgfs_pm.use_ps_poll)
+ cmd->flags |=
+ cpu_to_le16(POWER_FLAGS_ADVANCE_PM_ENA_MSK);
+#endif
return;
+ }
cmd->flags |= cpu_to_le16(POWER_FLAGS_UAPSD_MISBEHAVING_ENA_MSK);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
