On 07.08.2014 11:24, Ronald Wahl wrote:
+ /* We need to remember the type of endpoint 4 because it differs
+ * between high- and full-speed configuration. The high-speed
+ * configuration specifies it as interrupt and the full-speed
+ * configuration as bulk endpoint. This information is required
+ * later when sending urbs to that endpoint.
+ */
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; ++i) {
+ ep = &intf->cur_altsetting->endpoint[i].desc;
+
+ if (usb_endpoint_dir_out(ep) && usb_endpoint_num(ep) == 4)
+ ar->usb_ep4_is_bulk = true;
+ }
Hi,
just after sending out that patch I have seen that I should better use
AR9170_USB_EP_CMD instead of 4 when checking for the endpoint and maybe
rename the flag into usb_ep_cmd_is_bulk. But before creating v2 of the
patch I want to hear your comments...
- ron
--
Ronald Wahl - ronald.wahl@xxxxxxxxxxx - Phone +49 375271349-0 Fax -99
Raritan Deutschland GmbH, Kornmarkt 7, 08056 Zwickau, Germany
USt-IdNr. DE813094160, Steuer-Nr. 227/117/01749
Amtsgericht Chemnitz HRB 23605
Geschäftsführung: Stuart Hopper, Ralf Ploenes
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
