Wrong register was being set up. This could prevent firmware from booting in some rare cases when using legacy interrupts. Signed-off-by: Michal Kazior <michal.kazior@xxxxxxxxx> --- drivers/net/wireless/ath/ath10k/pci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index cfc1da2..54deea3 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2418,9 +2418,10 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar) if (ar_pci->num_msi_intrs == 0) /* Fix potential race by repeating CORE_BASE writes */ - ath10k_pci_soc_write32(ar, PCIE_INTR_ENABLE_ADDRESS, - PCIE_INTR_FIRMWARE_MASK | - PCIE_INTR_CE_MASK_ALL); + ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + + PCIE_INTR_ENABLE_ADDRESS, + PCIE_INTR_FIRMWARE_MASK | + PCIE_INTR_CE_MASK_ALL); mdelay(10); } while (time_before(jiffies, timeout)); -- 1.8.5.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
