Hi Krishnan, Here is sample 11ac config file: interface=uap0 driver=nl80211 ssid=mwifiex-11ac hw_mode=a channel=36 beacon_int=100 dtim_period=1 rts_threshold=2347 fragm_threshold=2346 auth_algs=1 send_probe_response=0 wmm_enabled=1 ieee80211n=1 ht_capab=[HT40+] ieee80211ac=1 vht_oper_chwidth=1 vht_oper_centr_freq_seg0_idx=42 Thanks, Avinash On Thu, Jul 31, 2014 at 11:24 AM, Krishnankutty Plachikkattle <Krishnankutty_Plachikkattle@xxxxxxxxxxxx> wrote: > Hello Bing, > > I am trying to enable HT support for 88W8897 using hostapd 2.2. > 80211n mode works well . Now I want to enable AC mode to improve throughput . > > Can you share a sample hostapd.conf with 80211ac configuration. > > Thanks in advance, > > Regards, > Krishnan. > > -----Original Message----- > From: Bing Zhao [mailto:bzhao@xxxxxxxxxxx] > Sent: Friday, May 30, 2014 6:16 AM > To: Avinash Patil; Krishnankutty Plachikkattle; linux-wireless@xxxxxxxxxxxxxxx > Subject: RE: Support for 88W8897 in 3.10.17 kernel > > >>>Is there any open source driver that supports NFC and Bluetooth in this SoC? >> Yes; btmrvl.ko and btusb.ko would support PCIe-USB8897 BT functionality. >> Please check CONFIG_BT_MRVL kernel configuration parameter. > > Clarification: > btmrvl driver only supports Bluetooth over SDIO (btmrvl_sdio). So it's for SD8897 cards only. > The generic btusb driver works for PCIe-USB 8897 cards (Bluetooth is over USB). > > Regards, > Bing > >> For NFC, nfcmrvl.ko & nfcmrvl_usb.ko would support 8897 NFC functionality. >> Please check for CONFIG_NFC_MRVL kernel configuration parameter. >> >> Thanks, >> Avinash > > > ________________________________ > > http://www.mindtree.com/email/disclaimer.html -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
