This is the first patchset iteration for review to implement the ath10k
spectral scan feature. The patchset is still experimental, but we were
able to detect our analogue 5.8 GHz TV repeater in the sample data. :)
As for ath9k, a proof of concept data plotter has been implemented, and
is currently available for ath10k in its own branch of FFT_eval [1].
There are a few open questions, and any help or pointers would be
appreciated:
* so far, we could only enable endless mode (samples are sent
endlessly). To prevent relayfs buffers overflowing because they are
not read from userspace, it would be great to set a "count" to limit
the number of samples sent after a trigger. That was possible in
ath9k as well. However, if we set the "scan_count" parameter in the
WMI command to something else than 0 (default), we don't get any
samples at all. Is there any other configuration which needs to be
done to get a limited number of samples?
* So far, we always get 64 bins of fft data in the samples, even if we
are in HT40 or VHT80 mode. That doesn't seem right, as there should
be more bins for wider channels (e.g. 128 or 256 bins). Is there any
parameter to change in the configuration to get the output from
multiple channels / higher bandwidth?
Kudos to Kalle and Michal for their help to get this started. :)
Cheers,
Simon
[1] https://github.com/simonwunderlich/FFT_eval/tree/ath10k_wip
Sven Eckelmann (2):
ath: Move spectral debugfs structs to shared header
ath10k: add spectral scan feature
drivers/net/wireless/ath/ath10k/Kconfig | 1 +
drivers/net/wireless/ath/ath10k/Makefile | 3 +-
drivers/net/wireless/ath/ath10k/core.h | 6 +
drivers/net/wireless/ath/ath10k/debug.c | 3 +
drivers/net/wireless/ath/ath10k/spectral.c | 368 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/spectral.h | 66 ++++++
drivers/net/wireless/ath/ath10k/wmi.c | 98 +++++++-
drivers/net/wireless/ath/ath10k/wmi.h | 80 +++++++
drivers/net/wireless/ath/ath9k/spectral.h | 71 +-----
drivers/net/wireless/ath/spectral_common.h | 108 +++++++++
10 files changed, 733 insertions(+), 71 deletions(-)
create mode 100644 drivers/net/wireless/ath/ath10k/spectral.c
create mode 100644 drivers/net/wireless/ath/ath10k/spectral.h
create mode 100644 drivers/net/wireless/ath/spectral_common.h
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
