Hi Andreas, ... uff.. again at91_ohci with 12 Mbit usb!!! No interest. I don't even wont to talk about it. Except only if you have usb protocol analyser. Beside, this warning is about slow path, which i would expect on this configuration. Am 04.07.2014 15:32, schrieb Anders Darander: > Hi, > > While porting an internal BSP (a design based on a at91sam9g20 SoC) > from 3.10 to 3.14, I got flooded with messages like: > > ~# usb 1-1: new full-speed USB device number 3 using at91_ohci > usb 1-1: ath9k_htc: Firmware htc_9271.fw requested > usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 > -----------[ cut here ]----------- > WARNING: CPU: 0 PID: 93 at > /mnt/cs-builds/anders/oe-build/build-ccu/tmp-eglibc/work/ccu-oe-linux-gnueabi/linux-yocto-ccu/3.14+gitAUTOINC+7b03bd3dfd-r0/linux/drivers/usb/core/urb.c:450 > usb_submit_urb+0x2ac/0x460() > usb 1-1: BOGUS urb xfer, pipe 1 != type 3 > Modules linked in: ath9k_htc ath9k_common ath9k_hw ath mac80211 > cfg80211 ccudrv(O) at91_disable_wdt(O) at91_bootcount(O) at91_adc(O) > CPU: 0 PID: 93 Comm: kworker/0:3 Tainted: G W O 3.14.10-ccu #2 > Workqueue: events request_firmware_work_func > [<c000d354>] (unwind_backtrace) from [<c000bb74>] (show_stack+0x10/0x14) > [<c000bb74>] (show_stack) from [<c00155ac>] (warn_slowpath_common+0x60/0x80) > [<c00155ac>] (warn_slowpath_common) from [<c00155f8>] > (warn_slowpath_fmt+0x2c/0x3c) > [<c00155f8>] (warn_slowpath_fmt) from [<c01d9c14>] (usb_submit_urb+0x2ac/0x460) > [<c01d9c14>] (usb_submit_urb) from [<bf134e28>] > (hif_usb_send+0x268/0x2c8 [ath9k_htc]) > [<bf134e28>] (hif_usb_send [ath9k_htc]) from [<bf133064>] > (htc_issue_send.constprop.4+0x64/0x68 [ath9k_htc]) > [<bf133064>] (htc_issue_send.constprop.4 [ath9k_htc]) from > [<bf133354>] (htc_connect_service+0x170/0x1c8 [ath9k_htc]) > [<bf133354>] (htc_connect_service [ath9k_htc]) from [<bf135484>] > (ath9k_wmi_connect+0x50/0x6c [ath9k_htc]) > [<bf135484>] (ath9k_wmi_connect [ath9k_htc]) from [<bf13b2e0>] > (ath9k_init_htc_services.isra.10+0x20/0x280 [ath9k_htc]) > [<bf13b2e0>] (ath9k_init_htc_services.isra.10 [ath9k_htc]) from > [<bf13b744>] (ath9k_htc_probe_device+0xe4/0x928 [ath9k_htc]) > [<bf13b744>] (ath9k_htc_probe_device [ath9k_htc]) from [<bf13374c>] > (ath9k_htc_hw_init+0x10/0x30 [ath9k_htc]) > [<bf13374c>] (ath9k_htc_hw_init [ath9k_htc]) from [<bf1345e0>] > (ath9k_hif_usb_firmware_cb+0x4cc/0x5c8 [ath9k_htc]) > [<bf1345e0>] (ath9k_hif_usb_firmware_cb [ath9k_htc]) from [<c018993c>] > (request_firmware_work_func+0x2c/0x4c) > [<c018993c>] (request_firmware_work_func) from [<c0026bd0>] > (process_one_work+0x20c/0x33c) > [<c0026bd0>] (process_one_work) from [<c002774c>] (worker_thread+0x234/0x384) > [<c002774c>] (worker_thread) from [<c002bea0>] (kthread+0xc0/0xd4) > [<c002bea0>] (kthread) from [<c00094d0>] (ret_from_fork+0x14/0x24) > --[ end trace b92d2c3cd165cd68 ]-- > -----------[ cut here ]----------- > > After temporarily reverting commit > 3482528e9aced9234d4e2a4a9538c882a9aa5aa2, which enables debug checks > on all USB urb's (previously is was only enabled for a > CONFIG_USB_DEBUG enabled kernel), the WiFi chip starts to work > correctly. The chip in question is a ar9721. > > The same USB stick works without these messages on my laptop; while > another USB stick, based on an rtl8187 chip, works without these > messages on the target system (at91sam9g20) > > Any pointers to what it could be? Or suggestions on how to attack the issue? > > Thanks in advance! > Cheers, > Anders > -- Regards, Oleksij
Attachment:
signature.asc
Description: OpenPGP digital signature
