Enable initialization and update calibration code to fix: b43-phy0 ERROR: Radio 0x2057 rcal timeout b43-phy0 debug: Radio 0x2057 rccal timeout b43-phy0 debug: Radio 0x2057 rccal timeout b43-phy0 ERROR: Radio 0x2057 rcal timeout Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> --- drivers/net/wireless/b43/phy_n.c | 63 +++++++++++++++++++++++++++++------ drivers/net/wireless/b43/radio_2057.c | 20 +++++------ 2 files changed, 61 insertions(+), 22 deletions(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 0fb5e14..8369a08 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -590,7 +590,9 @@ static void b43_nphy_set_rf_sequence(struct b43_wldev *dev, u8 cmd, * Radio 0x2057 **************************************************/ -/* http://bcm-v4.sipsolutions.net/PHY/radio2057_rcal */ +/* Calibrate resistors in LPF of PLL? + * http://bcm-v4.sipsolutions.net/PHY/radio205x_rcal + */ static u8 b43_radio_2057_rcal(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; @@ -603,15 +605,25 @@ static u8 b43_radio_2057_rcal(struct b43_wldev *dev) b43_radio_maskset(dev, 0x1ca, ~0x2, 0x1); } + /* Enable */ b43_radio_set(dev, R2057_RCAL_CONFIG, 0x1); udelay(10); - b43_radio_set(dev, R2057_RCAL_CONFIG, 0x3); - if (!b43_radio_wait_value(dev, R2057_RCCAL_N1_1, 1, 1, 100, 1000000)) { + + /* Start */ + b43_radio_set(dev, R2057_RCAL_CONFIG, 0x2); + usleep_range(100, 200); + + /* Stop */ + b43_radio_mask(dev, R2057_RCAL_CONFIG, ~0x2); + + /* Wait and check for result */ + if (!b43_radio_wait_value(dev, R2057_RCAL_STATUS, 1, 1, 100, 1000000)) { b43err(dev->wl, "Radio 0x2057 rcal timeout\n"); return 0; } - b43_radio_mask(dev, R2057_RCAL_CONFIG, ~0x2); tmp = b43_radio_read(dev, R2057_RCAL_STATUS) & 0x3E; + + /* Disable */ b43_radio_mask(dev, R2057_RCAL_CONFIG, ~0x1); if (phy->radio_rev == 5) { @@ -627,7 +639,9 @@ static u8 b43_radio_2057_rcal(struct b43_wldev *dev) return tmp & 0x3e; } -/* http://bcm-v4.sipsolutions.net/PHY/radio2057_rccal */ +/* Calibrate the internal RC oscillator? + * http://bcm-v4.sipsolutions.net/PHY/radio2057_rccal + */ static u16 b43_radio_2057_rccal(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; @@ -635,49 +649,76 @@ static u16 b43_radio_2057_rccal(struct b43_wldev *dev) phy->radio_rev == 6); u16 tmp; + /* Setup cal */ if (special) { b43_radio_write(dev, R2057_RCCAL_MASTER, 0x61); b43_radio_write(dev, R2057_RCCAL_TRC0, 0xC0); } else { - b43_radio_write(dev, 0x1AE, 0x61); + b43_radio_write(dev, R2057v7_RCCAL_MASTER, 0x61); b43_radio_write(dev, R2057_RCCAL_TRC0, 0xE1); } b43_radio_write(dev, R2057_RCCAL_X1, 0x6E); + + /* Start, wait, stop */ b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x55); - if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 1, 1, 500, + if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 2, 2, 500, 5000000)) b43dbg(dev->wl, "Radio 0x2057 rccal timeout\n"); + usleep_range(35, 70); b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x15); + usleep_range(70, 140); + + /* Setup cal */ if (special) { b43_radio_write(dev, R2057_RCCAL_MASTER, 0x69); b43_radio_write(dev, R2057_RCCAL_TRC0, 0xB0); } else { - b43_radio_write(dev, 0x1AE, 0x69); + b43_radio_write(dev, R2057v7_RCCAL_MASTER, 0x69); b43_radio_write(dev, R2057_RCCAL_TRC0, 0xD5); } b43_radio_write(dev, R2057_RCCAL_X1, 0x6E); + + /* Start, wait, stop */ + usleep_range(35, 70); b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x55); - if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 1, 1, 500, + usleep_range(70, 140); + if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 2, 2, 500, 5000000)) b43dbg(dev->wl, "Radio 0x2057 rccal timeout\n"); + usleep_range(35, 70); b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x15); + usleep_range(70, 140); + + /* Setup cal */ if (special) { b43_radio_write(dev, R2057_RCCAL_MASTER, 0x73); b43_radio_write(dev, R2057_RCCAL_X1, 0x28); b43_radio_write(dev, R2057_RCCAL_TRC0, 0xB0); } else { - b43_radio_write(dev, 0x1AE, 0x73); + b43_radio_write(dev, R2057v7_RCCAL_MASTER, 0x73); b43_radio_write(dev, R2057_RCCAL_X1, 0x6E); b43_radio_write(dev, R2057_RCCAL_TRC0, 0x99); } + + /* Start, wait, stop */ + usleep_range(35, 70); b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x55); - if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 1, 1, 500, + usleep_range(70, 140); + if (!b43_radio_wait_value(dev, R2057_RCCAL_DONE_OSCCAP, 2, 2, 500, 5000000)) { b43err(dev->wl, "Radio 0x2057 rcal timeout\n"); return 0; } tmp = b43_radio_read(dev, R2057_RCCAL_DONE_OSCCAP); + usleep_range(35, 70); b43_radio_write(dev, R2057_RCCAL_START_R1_Q1_P1, 0x15); + usleep_range(70, 140); + + if (special) + b43_radio_mask(dev, R2057_RCCAL_MASTER, ~0x1); + else + b43_radio_mask(dev, R2057v7_RCCAL_MASTER, ~0x1); + return tmp; } diff --git a/drivers/net/wireless/b43/radio_2057.c b/drivers/net/wireless/b43/radio_2057.c index d61d683..5e49440 100644 --- a/drivers/net/wireless/b43/radio_2057.c +++ b/drivers/net/wireless/b43/radio_2057.c @@ -26,7 +26,7 @@ #include "radio_2057.h" #include "phy_common.h" -static u16 r2057_rev4_init[42][2] = { +static u16 r2057_rev4_init[][2] = { { 0x0E, 0x20 }, { 0x31, 0x00 }, { 0x32, 0x00 }, { 0x33, 0x00 }, { 0x35, 0x26 }, { 0x3C, 0xff }, { 0x3D, 0xff }, { 0x3E, 0xff }, { 0x3F, 0xff }, { 0x62, 0x33 }, { 0x8A, 0xf0 }, { 0x8B, 0x10 }, @@ -40,7 +40,7 @@ static u16 r2057_rev4_init[42][2] = { { 0x1AB, 0x00 }, { 0x1AC, 0x00 }, }; -static u16 r2057_rev5_init[44][2] = { +static u16 r2057_rev5_init[][2] = { { 0x00, 0x00 }, { 0x01, 0x57 }, { 0x02, 0x20 }, { 0x23, 0x6 }, { 0x31, 0x00 }, { 0x32, 0x00 }, { 0x33, 0x00 }, { 0x51, 0x70 }, { 0x59, 0x88 }, { 0x5C, 0x20 }, { 0x62, 0x33 }, { 0x63, 0x0f }, @@ -54,7 +54,7 @@ static u16 r2057_rev5_init[44][2] = { { 0x1AC, 0x00 }, { 0x1B7, 0x0c }, { 0x1C1, 0x01 }, { 0x1C2, 0x80 }, }; -static u16 r2057_rev5a_init[45][2] = { +static u16 r2057_rev5a_init[][2] = { { 0x00, 0x15 }, { 0x01, 0x57 }, { 0x02, 0x20 }, { 0x23, 0x6 }, { 0x31, 0x00 }, { 0x32, 0x00 }, { 0x33, 0x00 }, { 0x51, 0x70 }, { 0x59, 0x88 }, { 0x5C, 0x20 }, { 0x62, 0x33 }, { 0x63, 0x0f }, @@ -69,7 +69,7 @@ static u16 r2057_rev5a_init[45][2] = { { 0x1C2, 0x80 }, }; -static u16 r2057_rev7_init[54][2] = { +static u16 r2057_rev7_init[][2] = { { 0x00, 0x00 }, { 0x01, 0x57 }, { 0x02, 0x20 }, { 0x31, 0x00 }, { 0x32, 0x00 }, { 0x33, 0x00 }, { 0x51, 0x70 }, { 0x59, 0x88 }, { 0x5C, 0x20 }, { 0x62, 0x33 }, { 0x63, 0x0f }, { 0x64, 0x13 }, @@ -86,7 +86,7 @@ static u16 r2057_rev7_init[54][2] = { { 0x1B7, 0x05 }, { 0x1C2, 0xa0 }, }; -static u16 r2057_rev8_init[54][2] = { +static u16 r2057_rev8_init[][2] = { { 0x00, 0x08 }, { 0x01, 0x57 }, { 0x02, 0x20 }, { 0x31, 0x00 }, { 0x32, 0x00 }, { 0x33, 0x00 }, { 0x51, 0x70 }, { 0x59, 0x88 }, { 0x5C, 0x20 }, { 0x62, 0x33 }, { 0x63, 0x0f }, { 0x64, 0x0f }, @@ -130,12 +130,10 @@ void r2057_upload_inittabs(struct b43_wldev *dev) } } + B43_WARN_ON(!table); + if (table) { - for (i = 0; i < 10; i++) { - pr_info("radio_write 0x%X ", *table); - table++; - pr_info("0x%X\n", *table); - table++; - } + for (i = 0; i < size; i++, table += 2) + b43_radio_write(dev, table[0], table[1]); } } -- 1.8.4.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
