Hi! I got problems initializing my ath10k PCI card in my Zyxel NBG 6716. It worked until some weeks, now, the driver does not load. I debugged a bit and this is what I got: Fri Jun 27 08:03:42 2014 kern.info kernel: [62908.290000] ath10k_pci 0000:01:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] Fri Jun 27 08:03:43 2014 kern.info kernel: [62908.610000] ath10k: pci irq legacy irq_mode 0 reset_mode 0 Fri Jun 27 08:03:43 2014 kern.err kernel: [62908.620000] ath10k: boot upload otp to 0x1234 len 6917 Fri Jun 27 08:03:43 2014 kern.err kernel: [62908.780000] ath10k: otp calibration failed: 2 Fri Jun 27 08:03:43 2014 kern.err kernel: [62908.790000] ath10k: failed to run otp: -22 Fri Jun 27 08:03:43 2014 kern.err kernel: [62908.790000] ath10k: could not init core (-22) Fri Jun 27 08:03:43 2014 kern.err kernel: [62909.060000] ath10k: could not probe fw (-22) Fri Jun 27 08:03:43 2014 kern.err kernel: [62909.060000] ath10k: failed to register driver core: -22 Fri Jun 27 08:03:43 2014 kern.warn kernel: [62909.060000] ath10k_pci: probe of 0000:01:00.0 failed with error -22 If I remove OTP loading the card initializes fine, but I think I will not have a good performance. So bad idea. Currently I use compat-wireless-2014-05-22, with some patches form openwrt. The firmware-2.bin has been checked, it is the same as offered here: https://github.com/kvalo/ath10k-firmware Perhaps somebody has a hint for me? Kind regards, André -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
