Search Linux Wireless

Re: [PATCH] net: wireless: rtlwifi: rtl8723be: hw.c: Cleaning up if statement that always evaluates to false

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 8 Jun 2014, Rickard Strandqvist wrote:

> I find a logical error in an if statement '(X & 0xfc) == 0x3' is always false
> 

Where is the 0xfc that your converting?

> After pointing this out, Larry Finger informed what would be the correct one.
> '(X & 0x3) == 0x3'
> 

This is already what it is, just say that you're replacing it with the 
constant.

> Signed-off-by: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
> ---
>  drivers/net/wireless/rtlwifi/rtl8723be/hw.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
> index 0fdf090..b61044f 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
> +++ b/drivers/net/wireless/rtlwifi/rtl8723be/hw.c
> @@ -1197,7 +1197,7 @@ static int _rtl8723be_set_media_status(struct ieee80211_hw *hw,
>  	}
>  	rtl_write_byte(rtlpriv, (MSR), bt_msr);
>  	rtlpriv->cfg->ops->led_control(hw, ledaction);
> -	if ((bt_msr & 0x03) == MSR_AP)
> +	if ((bt_msr & MSR_AP) == MSR_AP)
>  		rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
>  	else
>  		rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux