[RFC/RFT 5/5] rt2x00: do not initialize BCN_OFFSET registers

[Stanislaw Gruszka <sgruszka@xxxxxxxxxx>]

We setup BCN_OFFSET{0,1} registers dinamicly, don't have to
initialize them.

Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
---
 drivers/net/wireless/rt2x00/rt2800lib.c | 22 ----------------------
 1 file changed, 22 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index a9cdddd..893c9d5 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4562,28 +4562,6 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	if (ret)
 		return ret;
 
-	rt2800_register_read(rt2x00dev, BCN_OFFSET0, &reg);
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0,
-			   rt2800_get_beacon_offset(rt2x00dev, 0));
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1,
-			   rt2800_get_beacon_offset(rt2x00dev, 1));
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2,
-			   rt2800_get_beacon_offset(rt2x00dev, 2));
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3,
-			   rt2800_get_beacon_offset(rt2x00dev, 3));
-	rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg);
-
-	rt2800_register_read(rt2x00dev, BCN_OFFSET1, &reg);
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4,
-			   rt2800_get_beacon_offset(rt2x00dev, 4));
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5,
-			   rt2800_get_beacon_offset(rt2x00dev, 5));
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6,
-			   rt2800_get_beacon_offset(rt2x00dev, 6));
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7,
-			   rt2800_get_beacon_offset(rt2x00dev, 7));
-	rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg);
-
 	rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
 	rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
 
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html