It was never used, b43_switch_channel is always called with hw_value (from mac80211) or whatever get_default_chan returns. Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> --- drivers/net/wireless/b43/phy_common.c | 3 --- drivers/net/wireless/b43/phy_common.h | 4 ---- 2 files changed, 7 deletions(-) diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c index 08244b3..ac4cf2b 100644 --- a/drivers/net/wireless/b43/phy_common.c +++ b/drivers/net/wireless/b43/phy_common.c @@ -408,9 +408,6 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel) u16 channelcookie, savedcookie; int err; - if (new_channel == B43_DEFAULT_CHANNEL) - new_channel = phy->ops->get_default_chan(dev); - /* First we set the channel radio code to prevent the * firmware from sending ghost packets. */ diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h index 4ad6240..9a92df4 100644 --- a/drivers/net/wireless/b43/phy_common.h +++ b/drivers/net/wireless/b43/phy_common.h @@ -400,10 +400,6 @@ void b43_phy_take_out_of_reset(struct b43_wldev *dev); * b43_switch_channel - Switch to another channel */ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); -/** - * B43_DEFAULT_CHANNEL - Switch to the default channel. - */ -#define B43_DEFAULT_CHANNEL UINT_MAX /** * b43_software_rfkill - Turn the radio ON or OFF in software. -- 1.8.4.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html