On 29 May 2014 16:10, Bartosz Markowski <bartosz.markowski@xxxxxxxxx> wrote: > On 29 May 2014 15:47, Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote: >> >> >> On 05/29/2014 06:36 AM, Bartosz Markowski wrote: >>> >>> Firmware 10.x supports up to 8 virtual AP interfaces >>> (comparing to 7 for main firmware). Previous vdev map >>> initialization was missing enough space for 8 + 1 vdevs >>> (we may spent one for mac monitor), due to wrong define used. >>> >>> Use correct one - TARGET_10X_NUM_VDEVS - for 10.x firmware. >> >> >> You are bumping total vdevs up to 16 with that patch...have you >> actually tested that many? The stock firmware has quite a bit of >> deficiencies in the concurrency handling, at least for stations. > > No, I have never tested it with so many. I'm running tests with 8 at > most. And by this patch I just aimed to support 8 VAPS we advertise in > iface_combinations to mac80211 (.max_interfaces = 8). I was managed to > get only 7 before, since 1 vdev was being allocated as monitor. FYI: I quickly tried to extend the .max_interfaces + interface_combinations limit in ath10k and check with 15 VAPs (using hostapd, open network; on MIPS platform) and it just worked.. I did not perform any exploratory testing, but managed to connect a couple of clients to various bssids + run some sane iperf traffic etc. -- Bartosz -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
