This cleans code a bit and allows adding support for more devices.
Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx>
---
drivers/net/wireless/b43/main.c | 98 +++++++++++++++++++++++------------------
1 file changed, 56 insertions(+), 42 deletions(-)
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 19aefa8..72a8e3f 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5081,10 +5081,50 @@ static void b43_wireless_core_detach(struct b43_wldev *dev)
b43_phy_free(dev);
}
+static void b43_supported_bands(struct b43_wldev *dev, bool *have_2ghz_phy,
+ bool *have_5ghz_phy)
+{
+ u16 dev_id = 0;
+
+#ifdef CONFIG_B43_SSB
+ if (dev->dev->bus_type == B43_BUS_SSB &&
+ dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI)
+ dev_id = dev->dev->sdev->bus->host_pci->device;
+#endif
+
+ /* Note: below IDs can be "virtual" (not maching e.g. real PCI ID) */
+ switch (dev_id) {
+ case 0x4324: /* BCM4306 */
+ case 0x4312: /* BCM4311 */
+ case 0x4319: /* BCM4318 */
+ /* Dual band devices */
+ *have_2ghz_phy = true;
+ *have_5ghz_phy = true;
+ return;
+ }
+
+ /* As a fallback, try to guess using PHY type */
+ switch (dev->phy.type) {
+ case B43_PHYTYPE_A:
+ *have_2ghz_phy = false;
+ *have_5ghz_phy = true;
+ return;
+ case B43_PHYTYPE_G:
+ case B43_PHYTYPE_N:
+ case B43_PHYTYPE_LP:
+ case B43_PHYTYPE_HT:
+ case B43_PHYTYPE_LCN:
+ *have_2ghz_phy = true;
+ *have_5ghz_phy = false;
+ return;
+ }
+
+ B43_WARN_ON(1);
+}
+
static int b43_wireless_core_attach(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
- struct pci_dev *pdev = NULL;
int err;
u32 tmp;
bool have_2ghz_phy = false, have_5ghz_phy = false;
@@ -5096,19 +5136,13 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
* that in core_init(), too.
*/
-#ifdef CONFIG_B43_SSB
- if (dev->dev->bus_type == B43_BUS_SSB &&
- dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI)
- pdev = dev->dev->sdev->bus->host_pci;
-#endif
-
err = b43_bus_powerup(dev, 0);
if (err) {
b43err(wl, "Bus powerup failed\n");
goto out;
}
- /* Get the PHY type. */
+ /* Try to guess supported bands for the first init needs */
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
case B43_BUS_BCMA:
@@ -5132,48 +5166,28 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
dev->phy.gmode = have_2ghz_phy;
b43_wireless_core_reset(dev, dev->phy.gmode);
+ /* Get the PHY type. */
err = b43_phy_versioning(dev);
if (err)
goto err_powerdown;
- /* Check if this device supports multiband. */
- if (!pdev ||
- (pdev->device != 0x4312 &&
- pdev->device != 0x4319 && pdev->device != 0x4324)) {
- /* No multiband support. */
- have_2ghz_phy = false;
+
+ /* Get real info about supported bands */
+ b43_supported_bands(dev, &have_2ghz_phy, &have_5ghz_phy);
+
+ /* We don't support 5 GHz on some PHYs yet */
+ switch (dev->phy.type) {
+ case B43_PHYTYPE_A:
+ case B43_PHYTYPE_N:
+ case B43_PHYTYPE_LP:
+ b43warn(wl, "5 GHz band is unsupported on this PHY\n");
have_5ghz_phy = false;
- switch (dev->phy.type) {
- case B43_PHYTYPE_A:
- have_5ghz_phy = true;
- break;
- case B43_PHYTYPE_LP: //FIXME not always!
-#if 0 //FIXME enabling 5GHz causes a NULL pointer dereference
- have_5ghz_phy = 1;
-#endif
- case B43_PHYTYPE_G:
- case B43_PHYTYPE_N:
- case B43_PHYTYPE_HT:
- case B43_PHYTYPE_LCN:
- have_2ghz_phy = true;
- break;
- default:
- B43_WARN_ON(1);
- }
}
- if (dev->phy.type == B43_PHYTYPE_A) {
- /* FIXME */
- b43err(wl, "IEEE 802.11a devices are unsupported\n");
+
+ if (!have_2ghz_phy && !have_5ghz_phy) {
+ b43err(wl, "b43 can't support any band on this device\n");
err = -EOPNOTSUPP;
goto err_powerdown;
}
- if (1 /* disable A-PHY */) {
- /* FIXME: For now we disable the A-PHY on multi-PHY devices. */
- if (dev->phy.type != B43_PHYTYPE_N &&
- dev->phy.type != B43_PHYTYPE_LP) {
- have_2ghz_phy = true;
- have_5ghz_phy = false;
- }
- }
err = b43_phy_allocate(dev);
if (err)
--
1.8.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
