Hi Michael, This is different issue. We are trying to download 11AC_CFG command on SD8787 where 11ac is not supported. Thanks for reporting this; we are looking into it. Thanks, Avinash On Thu, May 15, 2014 at 10:45 PM, Michael Howard <mike@xxxxxxxxxxxxxxxxxxxx> wrote: > > On 15/05/2014 15:06, Avinash Patil wrote: >> >> Hi James/Anthony, >> >> If an unsupported command is downloaded to FW, it results into command >> response not supported - code 0x2. >> It wouldnt result into command timeout. >> According to our internal discussions, this issue is seen only on >> Globalscale mirabox where SDIO controller is mvsdio. >> >> "On Mirabox the SDIO controller is mvsdio. It polls for interrupts but >> polling itself doesn’t seem to be the problem. >> In the log, I got from another person it seems that there is no >> SDIO_INT bit in controller “intr” register after scan command is sent. >> Other commands are fine, only scan commands fail. I don’t why scan >> (0x06 or 0x107) is special in this case." >> >> Hi Anthony, >> >> Could you please enable dynamic debug on mwifiex, mwifiex_sdio & >> mvsdio driver; this will confirm if this is same issue. >> >> Thanks, >> Avinash. >> > Using kernel 3.15.0-rc5, starting hostapd results in; > > May 15 17:11:04 mirabox kernel: mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd > 0x112 error, result=0x2 > > hostapd runs but there in no AP. > > If I can be of any help testing/debugging just say so. > > Cheers, > Mike. > > -- > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
