From: Avinash Patil <patila@xxxxxxxxxxx> During SDIO MP aggregation, we at first acquire current write port to write data onto and then proceed with using this port for SDIO write. If error occurs later in mwifiex_write_data_sync because device is suspended or SDIO write failure, we do not restore current write port and write bitmap. This results into leaking one port and hole in SDIO write port bitmap. Restore current write port and reset bitmap accordingly in failure cases to avoid this. Reported-by: James Cameron <quozl@xxxxxxxxxx> Signed-off-by: Avinash Patil <patila@xxxxxxxxxxx> Signed-off-by: Bing Zhao <bzhao@xxxxxxxxxxx> --- drivers/net/wireless/mwifiex/sdio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index a1773d3..4ce3d7b 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -1678,8 +1678,12 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter, if (ret) { if (type == MWIFIEX_TYPE_CMD) adapter->cmd_sent = false; - if (type == MWIFIEX_TYPE_DATA) + if (type == MWIFIEX_TYPE_DATA) { adapter->data_sent = false; + /* restore curr_wr_port in error cases */ + card->curr_wr_port = port; + card->mp_wr_bitmap |= (u32)(1 << card->curr_wr_port); + } } else { if (type == MWIFIEX_TYPE_DATA) { if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port))) -- 1.8.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html