The device is queried about the usability of channels, but it did not
take 80MHz channels into consideration. This patch adds processing those
chanspecs and clear the NO_80MHZ flag for those control/primary channels.
Reviewed-by: Daniel (Deognyoun) Kim <dekim@xxxxxxxxxxxx>
Reviewed-by: Franky Lin <frankyl@xxxxxxxxxxxx>
Reviewed-by: Hante Meuleman <meuleman@xxxxxxxxxxxx>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 21 +++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 2d7c77d..290fc09 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -5191,6 +5191,9 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg,
if (!(bw_cap[band] & WLC_BW_40MHZ_BIT) &&
ch.bw == BRCMU_CHAN_BW_40)
continue;
+ if (!(bw_cap[band] & WLC_BW_80MHZ_BIT) &&
+ ch.bw == BRCMU_CHAN_BW_80)
+ continue;
update = false;
for (j = 0; (j < *n_cnt && (*n_cnt < array_size)); j++) {
if (band_chan_arr[j].hw_value == ch.chnum) {
@@ -5207,10 +5210,13 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg,
ieee80211_channel_to_frequency(ch.chnum, band);
band_chan_arr[index].hw_value = ch.chnum;
- if (ch.bw == BRCMU_CHAN_BW_40) {
- /* assuming the order is HT20, HT40 Upper,
- * HT40 lower from chanspecs
- */
+ /* assuming the chanspecs order is HT20,
+ * HT40 upper, HT40 lower, and VHT80.
+ */
+ if (ch.bw == BRCMU_CHAN_BW_80) {
+ band_chan_arr[index].flags &=
+ ~IEEE80211_CHAN_NO_80MHZ;
+ } else if (ch.bw == BRCMU_CHAN_BW_40) {
ht40_flag = band_chan_arr[index].flags &
IEEE80211_CHAN_NO_HT40;
if (ch.sb == BRCMU_CHAN_SB_U) {
@@ -5231,8 +5237,13 @@ static s32 brcmf_construct_reginfo(struct brcmf_cfg80211_info *cfg,
IEEE80211_CHAN_NO_HT40MINUS;
}
} else {
+ /* disable other bandwidths for now as mentioned
+ * order assure they are enabled for subsequent
+ * chanspecs.
+ */
band_chan_arr[index].flags =
- IEEE80211_CHAN_NO_HT40;
+ IEEE80211_CHAN_NO_HT40 |
+ IEEE80211_CHAN_NO_80MHZ;
ch.bw = BRCMU_CHAN_BW_20;
cfg->d11inf.encchspec(&ch);
channel = ch.chspec;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
