In the .start_ap callback cfg80211_get_chandef_type() was used to provide debug log info. However, this causes a warning when the chandef contains VHT channel with 80MHz bandwidth. Avoid the warning by just printing the channel and bandwidth instead. Reviewed-by: Hante Meuleman <meuleman@xxxxxxxxxxxx> Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx> Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx> --- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 401529c..5f89a42 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3766,10 +3766,9 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, enum nl80211_iftype dev_role; struct brcmf_fil_bss_enable_le bss_enable; - brcmf_dbg(TRACE, "channel_type=%d, beacon_interval=%d, dtim_period=%d,\n", - cfg80211_get_chandef_type(&settings->chandef), - settings->beacon_interval, - settings->dtim_period); + brcmf_dbg(TRACE, "channel=%d, bw=%d, beacon_interval=%d, dtim_period=%d,\n", + settings->chandef.chan->hw_value, settings->chandef.width, + settings->beacon_interval, settings->dtim_period); brcmf_dbg(TRACE, "ssid=%s(%zu), auth_type=%d, inactivity_timeout=%d\n", settings->ssid, settings->ssid_len, settings->auth_type, settings->inactivity_timeout); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
