We've implemented table calculation, but forgot to enable writing it in power setup function. By the way document table layout. Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> --- drivers/net/wireless/b43/phy_n.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 291b38c..482b312 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -3400,6 +3400,20 @@ static void b43_nphy_tx_prepare_adjusted_power_table(struct b43_wldev *dev) u8 idx, delta; u8 i, stf_mode; + /* Array adj_pwr_tbl corresponds to the hardware table. It consists of + * 21 groups, each containing 4 entries. + * + * First group has entries for CCK modulation. + * The rest of groups has 1 entry per modulation (SISO, CDD, STBC, SDM). + * + * Group 0 is for CCK + * Groups 1..4 use BPSK (group per coding rate) + * Groups 5..8 use QPSK (group per coding rate) + * Groups 9..12 use 16-QAM (group per coding rate) + * Groups 13..16 use 64-QAM (group per coding rate) + * Groups 17..20 are unknown + */ + for (i = 0; i < 4; i++) nphy->adj_pwr_tbl[i] = nphy->tx_power_offset[i]; @@ -3598,10 +3612,8 @@ static void b43_nphy_tx_power_ctl_setup(struct b43_wldev *dev) } b43_nphy_tx_prepare_adjusted_power_table(dev); - /* b43_ntab_write_bulk(dev, B43_NTAB16(26, 64), 84, nphy->adj_pwr_tbl); b43_ntab_write_bulk(dev, B43_NTAB16(27, 64), 84, nphy->adj_pwr_tbl); - */ if (nphy->hang_avoid) b43_nphy_stay_in_carrier_search(dev, false); -- 1.8.4.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
