Search Linux Wireless

Re: [RFT 0/4] ath10k: fix flushing and tx stalls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/06/2014 05:30 PM, Ben Greear wrote:
On 04/04/2014 04:37 AM, Michal Kazior wrote:
Hi,

After digging around I've found what seems to be
the problem with WMI Tx credit starvation and
inability to properly flush Tx in ath10k_flush().

I applied all four, rebooted AP and Station machine with the
new kernel (3.14.0-wl-ath+).  I had removed my own tx-hang detection
hack.

Looks like the problems start with patch 3/4.

All tests were done with all 4 patches applied on the AP machine,
and it appears that works fine.  The station machine worked fine with
the first two patches, but when third was applied, only a few stations
come up and I get behaviour similar to that described in the first email,
but I do not see anything obviously wrong in dmesg...

Thanks,
Ben

--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc  http://www.candelatech.com

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux