Search Linux Wireless

Re: [B.A.T.M.A.N.] [RFCv2 1/6] cfg80211: export expected throughput through get_station()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Mar 30, 2014 at 10:34:59PM +0200, Antonio Quartulli wrote:
> From: Antonio Quartulli <antonio@xxxxxxxxxxxxx>
> 
> Users may need information about the expected throughput
> towards a given peer computed by the RC algorithm.
> Export such value through the get_station() API.
> 
> This information is useful to the batman-adv module which
> will use it for its new metric computation.
> 
> Signed-off-by: Antonio Quartulli <antonio@xxxxxxxxxxxxx>
> ---
>  include/net/cfg80211.h | 63 ++++++++++++++++++++++++++++----------------------
>  1 file changed, 35 insertions(+), 28 deletions(-)
> 
> diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
> index fb8afce..4c8ebe9 100644
> --- a/include/net/cfg80211.h
> +++ b/include/net/cfg80211.h
> @@ -862,36 +862,38 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
>   * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled
>   * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled
>   * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled
> + * @STATION_INFO_EXPECTED_THROUGHPUT: @expected_throughput filled
>   */
>  enum station_info_flags {
> -	STATION_INFO_INACTIVE_TIME	= 1<<0,
> -	STATION_INFO_RX_BYTES		= 1<<1,
> -	STATION_INFO_TX_BYTES		= 1<<2,
> -	STATION_INFO_LLID		= 1<<3,
> -	STATION_INFO_PLID		= 1<<4,
> -	STATION_INFO_PLINK_STATE	= 1<<5,
> -	STATION_INFO_SIGNAL		= 1<<6,
> -	STATION_INFO_TX_BITRATE		= 1<<7,
> -	STATION_INFO_RX_PACKETS		= 1<<8,
> -	STATION_INFO_TX_PACKETS		= 1<<9,
> -	STATION_INFO_TX_RETRIES		= 1<<10,
> -	STATION_INFO_TX_FAILED		= 1<<11,
> -	STATION_INFO_RX_DROP_MISC	= 1<<12,
> -	STATION_INFO_SIGNAL_AVG		= 1<<13,
> -	STATION_INFO_RX_BITRATE		= 1<<14,
> -	STATION_INFO_BSS_PARAM          = 1<<15,
> -	STATION_INFO_CONNECTED_TIME	= 1<<16,
> -	STATION_INFO_ASSOC_REQ_IES	= 1<<17,
> -	STATION_INFO_STA_FLAGS		= 1<<18,
> -	STATION_INFO_BEACON_LOSS_COUNT	= 1<<19,
> -	STATION_INFO_T_OFFSET		= 1<<20,
> -	STATION_INFO_LOCAL_PM		= 1<<21,
> -	STATION_INFO_PEER_PM		= 1<<22,
> -	STATION_INFO_NONPEER_PM		= 1<<23,
> -	STATION_INFO_RX_BYTES64		= 1<<24,
> -	STATION_INFO_TX_BYTES64		= 1<<25,
> -	STATION_INFO_CHAIN_SIGNAL	= 1<<26,
> -	STATION_INFO_CHAIN_SIGNAL_AVG	= 1<<27,
> +	STATION_INFO_INACTIVE_TIME		= 1<<0,
> +	STATION_INFO_RX_BYTES			= 1<<1,
> +	STATION_INFO_TX_BYTES			= 1<<2,
> +	STATION_INFO_LLID			= 1<<3,
> +	STATION_INFO_PLID			= 1<<4,
> +	STATION_INFO_PLINK_STATE		= 1<<5,
> +	STATION_INFO_SIGNAL			= 1<<6,
> +	STATION_INFO_TX_BITRATE			= 1<<7,
> +	STATION_INFO_RX_PACKETS			= 1<<8,
> +	STATION_INFO_TX_PACKETS			= 1<<9,
> +	STATION_INFO_TX_RETRIES			= 1<<10,
> +	STATION_INFO_TX_FAILED			= 1<<11,
> +	STATION_INFO_RX_DROP_MISC		= 1<<12,
> +	STATION_INFO_SIGNAL_AVG			= 1<<13,
> +	STATION_INFO_RX_BITRATE			= 1<<14,
> +	STATION_INFO_BSS_PARAM			= 1<<15,
> +	STATION_INFO_CONNECTED_TIME		= 1<<16,
> +	STATION_INFO_ASSOC_REQ_IES		= 1<<17,
> +	STATION_INFO_STA_FLAGS			= 1<<18,
> +	STATION_INFO_BEACON_LOSS_COUNT		= 1<<19,
> +	STATION_INFO_T_OFFSET			= 1<<20,
> +	STATION_INFO_LOCAL_PM			= 1<<21,
> +	STATION_INFO_PEER_PM			= 1<<22,
> +	STATION_INFO_NONPEER_PM			= 1<<23,
> +	STATION_INFO_RX_BYTES64			= 1<<24,
> +	STATION_INFO_TX_BYTES64			= 1<<25,
> +	STATION_INFO_CHAIN_SIGNAL		= 1<<26,
> +	STATION_INFO_CHAIN_SIGNAL_AVG		= 1<<27,
> +	STATION_INFO_EXPECTED_THROUGHPUT	= 1<<28,
>  };


Hi Antonio

>  /**
> @@ -1013,6 +1015,9 @@ struct sta_bss_parameters {
>   * @local_pm: local mesh STA power save mode
>   * @peer_pm: peer mesh STA power save mode
>   * @nonpeer_pm: non-peer mesh STA power save mode
> + * @expected_throughput: expected throughput as reported by the RC algorithm
> + *  about the bitrate having the maximum throughput. This field can be filled
> + *  only by drivers using Minstrel
>   */
>  struct station_info {
>  	u32 filled;
> @@ -1051,6 +1056,8 @@ struct station_info {
>  	enum nl80211_mesh_power_mode peer_pm;
>  	enum nl80211_mesh_power_mode nonpeer_pm;
>  
> +	u32 expected_throughput;
> +

It would be nice to comment on what the units are. I known from our
BATMAN V discussions, it is something odd.

       Andrew
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux