> However, it never found the hidden AP I was using (ie, it > never replaced the blank SSID in the iwlist scan results with > the actual SSID as I'd expect). I haven't tracked that down > quite yet, but it might be an issue in the scan result > handling code or it could be firmware. Do you mean that 00:1D:60:14:33:2B <empty SSID> 00:1D:60:14:33:2B WLAN should be unified into 00:1D:60:14:33:2B WLAN ??? First I wanted to do that, but then I thought that maybe this is erraneous. An AP can have several SSIDs, one of them could be hidden, the other ones not hidden. E.g. this is easy to setup on a Cisco 123x or Cisco 124x access-point. I also have a "take 3" of this patch now, because I adapted (after a chat with David on IRC) the outstanding patches from libertas-2.6 to wireless-testing. Two of the patches touched scan.c as well, so I rewrote my scan-for-specific-ssid patch to apply on top of the 5 David-Woodhouse-patches. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
